Well I'm nearing the completion of my exterior and I'm thinking that I am going to get the Jtuners turbo kit. Now what would be the best injectors and fmu to get for my car? I will be porting the head, 3 angle valve job, bigger throttle body, 3" exhaust and a custom downpipe (since Jtuners is so small). Any information on which injectors and fmu would be great.
Also please no flaming I've seen people ask this and get flamed before so If I could just get a straight answer that would be awsome.
Thanks,
-Paul
I'll have the basic T3 super 60 from the Jtuners kit and I will run 10-20 PSI (20 only being on the track). I will run 10 on average and I am going for around 275 hp.
-Paul
Of course I'm not, I know about turbos and whats needed but I dont know whats needed in a J-body for which injectors and fmu for fuel. I'm getting forged internals and porting valve job the whole works.
Cavy2Env wrote:Of course I'm not, I know about turbos and whats needed but I dont know whats needed in a J-body for which injectors and fmu for fuel. I'm getting forged internals and porting valve job the whole works.
If you need an FMU, get an Cartech Adjustable FMU. Maybe someone can help you with the injectors part.
www.kronosperformance.com / 732-742-8837
Cartech FMU and 30 lbs injectors or larger.
275hp & 306tq - 1999 2.2 ohv
13.2 @ 108 mph
-1996 2.4 liter + Turbo + Built motor + Torco + More boost = Lots o' Power
-2000 Mustang GT + 2004 Cobra motor, Whipple 2.3 supercharger,
built rear-end,Dodge Viper spec T56 6 speed, bolt-ons = wheelies at the track!!!!!
