I have a 1999 Cavalier 2.4 turbo project started. i am going to run 6-8 psi on stock internals. I have an FMU and fuel rail. Should I buy injectors, if so which are best. also should I get a fuel pump? Greddy E-Manage? S-AFC? I want this to be safe as possible, any help is appreciated greatly!

yes, you could trysome 310cc rc engineering injectors



LE61T PTE6262 Powered

Search the classifieds for the GM S/C 310cc injectors, or Ford Red Top injectors........ will work fine with your setup.

Also pick up a Adj. FPR......... use that to lower the fuel pressure to get a good idle, and use the FMU to bring that pressure back up under boost. Either get a Adj. FMU, or at least a 6:1 Ratio FMU.

Good Luck






SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap