wheres the best place to tap the oil feed line into thanks john
I have mine on the block were the oil seding unit is at just put a t fitting.
3 in above the oil filter their is a 1/4 plug tap there.
Yep, it's on the backside of the block. Remove the sensor, screw in the T-fitting, and put the sensor on one side of the T and the feed line on the other
Good luck.
MaximumBoost.net
1-888-TURBO-31
sales@maximumboost.net
TAX ID: 45-8013458577-3
what is the t fitting called. what size is it and the threads i live in hillbilly country if it isnt carborated nobody knows anything where do i purchase it at
^^get it from jegs they have a mess of an fittings and the like
but yea what he said... what size is it everyone??
its a 1/4" NPT
<a href="http://www.cardomain.com/id/fireside"><img src="http://www.influx.ca/avatars/stevefiresig.jpg"></a>
i just got under my cavi and the 1/4 tap with a plug in it right above the oil filter that takes a square driver is that the above mentioned the second reply by josh czajk what size driver and theres two taps at 90 degrees can i use the other for oil pressure gauge
thanks john
