hey sup
i decided to finish up my safc install tonight
i was told that the pin 20 on my car was the pcm fuse and that i should tap into there so i did, well now my safc is on when my car is off and when i put the car into the ready possition it shuts off, i havent yet tryed to start my car because i know that be would be bad
i dunno this seems really odd as the safc is getting power but just when the car is off
anyone know what i should do as i doubt switching the power to pin 19 would help
let me know what you think asap
yeah thats what im using
i dunno how to get this damn thing to turn on at the right time
get your hands on a light tester so you can turn the key in on position..start checkinbg some wires for a 12v source...then turn the key off and see if you got any power still..if not then thats your wire to tap into....
Amps for car audio obviously needs a remote wire connection (12v power when the car is in "on" position) and i always tapped off the radio fuse.
well i just got it working right
do not put it to pin 20 on a 97-98 car as this is the wrong pcm fuse, it however is supposed to be hooked up to pin 19 which is the pcm/ignition fuse and this one works just fine
i got the safc II up and running and things seems fine
some people told me to put it to 5 in 5out but that didnt work so im running with 5 in 00 out and thats working great
car seems to run like normal, so now its time to tune these injectors ill let you know how i made out
thanks anyways for trying to help out
Let me know Z nice to see things going good you should of given me a call. I could of helped you out.. Later.
