Count me in!
13.520 @ 98mph! 220whp 234tq
Quick question, will it have the slot for cruise control? And will it come with the gasket and bolts?
13.520 @ 98mph! 220whp 234tq
02cavcruzin wrote:Quick question, will it have the slot for cruise control? And will it come with the gasket and bolts?
You know what... I didn't even think about the cruise control because when I built mine the cruise was broken but I'd have to check and make sure the cuise hooks up to ls1 truck style tb. I ironically picked up a cruise modual at the yard last weekend when I grabbed tails for my trunk swap so I'll see if it works. I have no problem setting them up to work with cruise. As far as gaskets go I will not include one because it will add to the cost and be more for me to get. I used just a thin layer of black RTV and it's been fine the entire time. As for the hardware I'm leaving it up to you guys to source 3 bolts and nuts from an ace hardware or home depot. I reused my bolts from the gmpp tb adaptor to hold mine onto the blower. This would just be for the tb adaptor.
And just for anyone else who does have questions about running an LS tb on our cars you'll need to source and LS1 tps pigtail to install on our engine harness's because the connector is different but the wiring is the same...blue to blue black to black....etc etc. The IAT plug will work with the LS1 Iat sensor.
Def interested, any idea how much?
z28guy(KGM BEOTCH)
z28guy wrote:Def interested, any idea how much?
I'm going to try and keep it around 100 shipped. I'm waiting to see how much metal cost's and how long it takes me to whip one up since it's been over 1.5-2 years since I made mine and off hand I don't remember how much time I spent on making it.
Is there any other tps plug that will work with the truck tb? I'm having a hard time finding one.
13.520 @ 98mph! 220whp 234tq
JUCNBST wrote:
And just for anyone else who does have questions about running an LS tb on our cars you'll need to source and LS1 tps pigtail to install on our engine harness's because the connector is different but the wiring is the same...blue to blue black to black....etc etc. The IAT plug will work with the LS1 Iat sensor.
I have still been making the TPS conversion harness for a few people on and off all summer. I currently have the materials to make one more, but i can order more materials without a problem.
Error: Sig not found.
I'll check my saved links once I'm home but i want to sat it's btmotorsports or something close to that. They sell all kinds of automotive electrical connectors and pig tails. I'll post that up later.
My premium membership expired toward the begining of fall. Once I've got some whipped I'll be going premium again. I have no problem contributing via $$
In for one ASAP with cruise
z28guy(KGM BEOTCH)
Would you be able to make these from the M45 or is the LS1 TB just to big for that charger?
Iirc the tb is cast into that blower no? Also I don't have one to fab with
Nope it uses the stock LD9 TB or the RSM 62mm. If you ask me the LD9's tb is way to small and I can't find an RSM to save my life.
N/A2.4-If there was a local m45 car to me I'd consider making them, but I'm not aware of any locals with on. They're all eco's.
I did get my drill press vise in the mail today and I should be picking up metal this weekend. I'll keep everyone posted
Yeaaaaaaa boy!
13.520 @ 98mph! 220whp 234tq
well i guess if cody is gunna do it then i might have to... i replied to ur thread on ef.com
I responded on ef.com just now haha
Here is a list I'm starting...and cuise will be put on all adaptors because I'm not going to make separte with and without throttle cable brackets as needed. I only want to keep one template. This list doesn't require any payment but is intended as a call list for people interested. I'm going to make the first batch and shoot out pm's once they are ready to ship. If you can't pay thats cool I'll just keep goint down the list. I ordered enough metal to build 8 adaptors to start and if there is demand I can/will build more.
1. 02cavcruzin ( jbo )
2. z28guy ( jbo )
3. scrapz253 ( ef.com )
4.
5.
6.
7.
8.
batch 2?........
Just another update guys. I got home from work and got the new press vise unpackaged and the dam jaws only open to 4 3/4 inch not the advertised 5 like I was looking for. So I'm going to mod this one a bit and see if i can get another 1/4 out of it....otherwise I'm going to pickup another.
MRThompson (jrthompson) wrote:Add me.
Lazy...
1. 02cavcruzin ( jbo )
2. z28guy ( jbo )
3. scrapz253 ( ef.com )
4. Magik1109 (jbo)
5.MRThompson (jbo)
6.
7.
8.
I picked up the metal and should start working on them this week, I'm getting ready for the g/f birthday weekend now so no progress will be made.