Well I picked up a Saab Turbo setup and installed it on to my car. At idle it seems to run fine, but when I Rev it up it has a miss and continues to miss till I turn the car off and restart it. I was going to try plugs first but I'm new to boost so after that I'm unsure. Any help would be nice. Thanks.
what fuel mods do you have done?
Plugs should be gapped at about .035 with boost
LE61T PTE6262 Powered 
It's t2's old setup. Has Saab green top injectors, GM supercharger flash, SS tmap sensor.
This confuses me too...
Those plugs were fine when I ran them, and that's the only idea I really think for the misfire. That computer worked fine too, maybe a security relearn or something?
security relearn was already done.
Like I said, I hate to say it is plugs being they were fine when I had to tear down. They probably only have 5,000-6,000 miles on them, but it is a cheap fix if that is the problem. Hoping that's all it is too.
Did you rewire the tmap on your car or just swap out injector wire harnesses? I usually spray some electrical contact cleaner in that big connector when I unplug it just to be safe. Did you make sure all the injector clips were in good.
There was a vacuum line that runs off the valve cover to the inlet of the turbo that I didn't get on. That was the whole problem. Thanks for the help everyone. Runs nice and smooth now. Now it's time to get use to the boost.
Get some videos I wanna hear it lol.
i will try to tomorrow. i enjoyed it a little bit tonight then it got dark. the other slocav(andy) the one i got the turbo from, wants me to post it up to. if i don't here i will have a post in photo & media.
Darn right I want ya to post up some pics/vids. I miss having a fun car, wish I had more money to start my build. Tell ya what, boost is addicting as hell!
yes i agree. especially when you want your car to pull like your r6. lol
MRThompson (jrthompson) wrote:There was a vacuum line that runs off the valve cover to the inlet of the turbo that I didn't get on. That was the whole problem. Thanks for the help everyone. Runs nice and smooth now. Now it's time to get use to the boost.
What line? the valve cover breather hose?
yeah. it was routed over to a tube on the turbo.
i'm gonna block that off and use a breather on the valve cover.
what is the saab turbo setup. I cant find a turbo set let alone i dont even know were to begin ( i looked at the how to build forum) its just that can i use any turbo, but need the right turbo mani right?
so by hookin up the line on the turbo to were the valvecover breather went it fix your misfire ?? im havein this problem too
