Ok well after about a day of searching i have found the original manufaturer of the t/b adapter. And since they are no longer affiliated w/ GM are able to sell them.
So if you guys are intrested they are 439 bucks if i order one
and 109 if i order 10. Yea thats what i said.
Is anybody really intrested in one? If we get alot more people it will really drop the price down.
So if you want one let me know. This isnt a forsure thing i just wanna see how many people would be intrested.
I just wanna make a list for now, and if there is real intrest we will go from there.
Talk has already been had w/ said company and could have them in 3-4 weeks with payment up front.
not a bad price for 10 people, maybe it is lol i dont know how much it cost to make one.. who makes them?
12.33 @ 111.67 mph [Oct 2009]
Dyno'd on 08/02/09 - Mustang Dyno:
327.6 WHP 333.6 WTQ [10.1 AFR]
Buy ten and sell for a profit.
as said on ecotec forums, i may be interested.
my carDomain updated 8/10/09 Forged and no boost
get me a picture with some dimentions and i might be able to get them made for cheaper
BP (brandonpauli) wrote:get me a picture with some dimentions and i might be able to get them made for cheaper
I doubt it, because of the transition from 58 to 68mm and it being offset, unless you have a 5 axis machine......Snow I should have money for a few.
Edited 1 time(s). Last edited Tuesday, September 22, 2009 4:11 AM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
snow any update?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
nope, noone yet...i just made my own...piece of aluminum and a plasma cutter
Can you email or pm me the contact info....if you do not go through with it....
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Justin, Thanks
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-MD- Enforcer wrote:BP (brandonpauli) wrote:get me a picture with some dimentions and i might be able to get them made for cheaper
I doubt it, because of the transition from 58 to 68mm and it being offset, unless you have a 5 axis machine......Snow I should have money for a few.
my dad manages a machine shop so im sure we could come up with something
I need one...who else is down?? or who can make me one??
i need one
Mods: Synapse Charge Piping, Short Throw, Bad-Mab Dp, Dejon Intake, BYT Tuned!
Parts For SALE! Pacesetter Header(ECO),17'in Resonator, Alternator, Starter, Viper Alarm.
I actually just contacted the original supplier thanks to snowman. I should be receiving the quote back today, or tomorrow. I'll post up prices as soon as I get the info.
They will not make any until they have all the money up front.
Edited 1 time(s). Last edited Friday, October 16, 2009 7:40 AM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
As posted on EF, I need one
combined list of interest, needs, etc from both ecotecforum and j-body.org.
i would think the 2.2 cobalts would need this as well?
1. Solution (interest, jbo)
2. CLC
3. Exesivefire (?)
4. admpos88
5. Vic (both forums)
6. Duece Man X (jbo)
7. Mr. Choo (both forums)
8. Merlyn
9. Christopher Greene (jbo)
10. Mike Campanella (interest, jbo)
11. s1lver_N1p (maybe)
12. CrazyFoo (don't think he needs it now)
13. Lefix (don't think he needs it now)
by now, if i'm buying an adapter it's going to be for the ls1 tb
my carDomain updated 10/31/09 Forged and Supercharged
I would like one if the price goes down with all the people wanting one. and if no one backs out
It is not going down. $150....per the group purchase....
There have been three people interested so far.
No one else has responded.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
^^^^ It is so sad and pathetic how that works isn't it
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
what happened to 109 if 10 people ordered it? wouldnit be lower when i see 13 ppl want in. is it reasonable for this part?
whiteknight23 wrote:what happened to 109 if 10 people ordered it? wouldn't be lower when i see 13 ppl want in. is it reasonable for this part?
when I contacted the original company I was not given the same price snow was. Yes, there is 13 people interested,
but only two people that want to pay. The company wants 100% of the money up front, and that is something I can not change.
The GP is $150 shipped, tracked and insured.
There is NO way I'm going to lose money to sell something.
I'm sorry if my wording sounds harsh, that is not my intent.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Not harsh at all, just the truth. i agree i would not want to take that chance if it were me. keep up the good work MD im behind ya
