ok i was wondering if anyone would have or know where i could get the slim pcv for a supercharger set-up besides gm cuase they charge nearlly 300 dollars thanks
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
holy @!#$ i can't believe it's that much
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
That is the only place is through GM dealers. I had to buy it when I bought my M45 from Brad. I went through gmpartsdirect.com The price was good but they rape you on the inflated shipping cost. Or somone wih a gm dicount such as Brad they always give him a big discount at the dealer he goes through.
![](http://i37.photobucket.com/albums/e69/wjz24/notforsalesig.jpg)
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
^^^ my price is $287.
couldnt f'n believe it, i want one as well just because its smaller and it routes the hoses a lil differently and out of the way but DAMN even thats expensive for my tastes...
![](http://i139.photobucket.com/albums/q289/fast97z24/newsig-1.jpg)
You look so much cuter with something in your mouth.
ya thats a lil crazy.... but i need so i guess ill have to bend over and get raped by GM
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
Damn, Im selling my m45 kit minus injectors/map sensor to a buddy for $300 lol.
icemike89 wrote:Damn, Im selling my m45 kit minus injectors/map sensor to a buddy for $300 lol.
Wow sounds like you are getting the short end of the stick on that deal.
![](http://i37.photobucket.com/albums/e69/wjz24/notforsalesig.jpg)
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
Meh, the sc needs a bearing replaced. Plus the bracketry and pcv pipe have some paint flaked off. Its just sitting here wrotting lol, I need another boosted j around me to hang with the turbo
anyone have the part number?
so i can check other sites....
![](http://i139.photobucket.com/albums/q289/fast97z24/newsig-1.jpg)
You look so much cuter with something in your mouth.
bump
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
update... wichers and a kid in schoold are gonna try and make on for 50-60 dolllars
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
i need a part number.
![](http://i139.photobucket.com/albums/q289/fast97z24/newsig-1.jpg)
You look so much cuter with something in your mouth.
wichers has the pcv now...
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
Baffle assembly PCV 88960484
Seal PCV Baffle 88894217
![](http://i37.photobucket.com/albums/e69/wjz24/notforsalesig.jpg)
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
WOW!!!!!
definitely didnt see that coming.
ill be honest cody, i called gm about it when you asked but they said they needed a part number so i just guessed at the price going by what i remember wade spending on his....
i thought $287.. not even close. list is $553 and MY COST is $480.
big f'ing g'damn it.
![](http://i139.photobucket.com/albums/q289/fast97z24/newsig-1.jpg)
Are you scared of the changes coming? The answer is on the inside.
wow/!!!!!!!!!!!!!!
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
wichers found a lil better price but not much better still in 400s @!#$ i hope his friend can build one
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
I plan on just making one. Flat steel plate tapped out for some nipples. Can't be that hard...
![](http://www.lasergrave.net/luke/jbo/jbo_sig.jpg)
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
just buy a new m45 s/c kit lol not much more for a whole new kit than this little part haha
Cursed Cav (Luke Heier) wrote:I plan on just making one. Flat steel plate tapped out for some nipples. Can't be that hard...
can u keep me updated on that incase wichers cant do it
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
Cody Star wrote:Cursed Cav (Luke Heier) wrote:I plan on just making one. Flat steel plate tapped out for some nipples. Can't be that hard...
can u keep me updated on that incase wichers cant do it
Will do
![](http://www.lasergrave.net/luke/jbo/jbo_sig.jpg)
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
k thanks mine is getting drawn up now no idea how soon it will so to the machine shop
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
so any word on it yet?
![](http://i392.photobucket.com/albums/pp4/cavycody/2m7g9vp.jpg)
8 psi with m62 and IAT under 100
Not yet. I haven't even had time too look at it. I've had to work like crazy lately. I may be in a bit of a predicament as well. I can get it drawn up in CAD, but the problem is for someone to machine it. My dad works at a manufacturing plant and was going to have a machinist do it for me. However, they are so slow, all the machinists are laid off right now. It may take longer than expected...
![](http://www.lasergrave.net/luke/jbo/jbo_sig.jpg)
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R