Just kinda bored and wanted to put this all together not only to get myself straight, but to address a couple things. My basic list of things so far is...
T3 super60 60/48 w/360 bolt down thrust from down2turbo on ebay
Cartech 2025 FMU from lightningmotorsports.com $193shipped
T3 AMG 3-bolt downpipe flange from 42draftdesigns.com $28
Wastegate actuator 6lb ATP-WGT-011B from atpturbo.com $69 (Turbo came with a 10 adjustable one but I just wanted to slap a new one on for the correct amount and just to be safe)
Jegs Fuel Pressure Gauge tapped into hardline before the rail $17 ---> pics of install
http://www.j-body.org/forums/read.php?f=46&i=237196&t=237196
CF boost gauge 30in/hg-30lbs mechanical $56
Thats what I have. What I still need is.....
Mani for a 2.4 internally gatted
Walbro 255hp lph #fpg0003
AFPR from summitt pn 74565
Intercooler STILL LOOKING FOR SOURCE TO BUY WHILE JOHNNY IS DOWN.
aem uego wideband.
Istill need injectors! someone please recommend some that are easy to install I figured something low. I'm sticking withthe FMU and at the most 10lbs of boost but sticking with 6 for a while first. HIGH IMPEDENCE RIGHT?
I have a turboxsrfl, oil feed/return kit, charge piping, and couplers and t-bolts coming from a member here shortly.
Think thats it. Let me know if I missed anything.
A good cheap manifold are the ebay ones from canada. Mine works real nice with my turbo from down2turbo. Hey does that 3 bolt flange line up or have you not received it yet becuase I homemade one and I am wanting to replace it before I wrap it and stuff.
~Boost. Its what's for dinner!~
looks like i lucked out on my jrc intercooler. I found one in the classifieds
. good luck to your boost project tho. Im on my way for boost too
Now Powered By TEAM GREEN
http://www.cardomain.com/ride/827643
boost will be soon for me....
thanks to mil county police in the state of wisconsin. I know that my window tint is rated at 3.7%
TIM
Yes, the flange was made to fit and does it well. A lot of people get those very odd sized exhaust housings from mr. down2turbo and have to make their own. It took me a couple of weeks of searching before i dixcovered this link
http://www.42draftdesigns.com/product/flanges/turbodischargeflanges.htm
It'll be the second one down. They have GreaT shipping speed. Thanks to chris at rdfabs for the link though.
Cool. And I found this
http://stores.channeladvisor.com/verociousmotorsports/Items/F250-2SLC? and I am away from home so I can't check the dimensions. I used a old 2 bolt exhuast flange that works okay but I would like something nicer to make the setup better. Would you mind measuring to see if it would fit the inlet to the compressor? Thanks!
~Boost. Its what's for dinner!~
