What is the pressure output of the Hahn Racecraft in-line fuel pump?
Mine just went tits up and I don't feel like paying $270 US for a new one from hahn. If I knew the pressure output I could just pic up a new one here in Ontario at an auto parts dealer for ALOT cheaper.
Thanks Guys
Evan
Mind if I ask how many miles/useage the pump had on it? Mine is new and sounds like crap. Makes pulsing sounds and varies in pitch and loudness. Did yours do that before it crapped out? I don't want to be left high and dry one day.
"If you aren't shifting, then you certainly aren't driving!"
I talked to HAHN at Sema last year about the noises my pump makes. Seems like there's about 3 sounds, loud, louder, and when it's hot, insane. They assured me it was normal and I'm pretty used to the sound now, lol.
The reason I want to replace it is because one of the contacts blew of the pump. plus it has one CDN winter under its belt along with a ton of KM's. Personally I don't like the idea of an in-line pump, it lacks reliability, but I can't find an in-tank that I think is up to the task. I tried a Walbro 255, but it only puts out 90 psi. But thats beside the point of this thread.
You guys wouldn't happen to know the PSI output of the in-line would you??
Thanks Again
I found out the type of pump.
Its a 500hp fuel pump with an output of 125 PSI. Just for future reference.
I actually broke the negative terminal stud off my pump during the install. I ended up just soldering the wire directly to the remains of the stud. It works fine other than the noises I mentioned previously. If you need a stop-gap that should do it for you.
"If you aren't shifting, then you certainly aren't driving!"
