i want to install my ps2 in my cavy but i dont know how. i already have an Alpine 7" indash in my cavy so could some one tell me how to hook up the ps2 to it and how to get power to it.. thanks
http://img37.exs.cx/img37/2828/dacopy0wr.jpg
WWW.sinisterambitions.com
You need a power inverter. There is more but i cant think right now. And a cable to go from you rca jacks on your ps2 to the screen. Oh and an fm modulater.
Im prolly wrong but this will give you a start
____________________
84 Fiero
well ill answer this in hopes that the karma will help me get my problem fixed.
Ok ready, it's real simple for starters make sure you have an audio in to your head unit (red and white ps2 cords) and a video in all properly set up then you hook up that to the playstion. after that is done you have to get the power invert to get AC to DC. once that task is compleate all you have to do is run the wires and make some sort of mounting bracket in the glove and your good to go. have fun!
"
boobs now with Riboflabin"
i didnt need an FM modulator too hook my X box up..
Anyways for the wires from the TV..there should be the red/black and the yellow video output..Hook the yellow one up to the yellow rca from the PS and run the red wire into the Windshield wiper fuse and then the black is the ground..i found that if you remove the whole fuse box cover(not just the panel) that there is a bolt that works pretty good for a ground..
Good Luck
sndsgood wrote:if you have an indash screen chances are good you should have an audio and vidio imput allready on it.
yeah it has them i really just needed to know how to get power to the system
http://img37.exs.cx/img37/2828/dacopy0wr.jpg
WWW.sinisterambitions.com
