Interconnect cables - Audio & Electronics Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Interconnect cables
Wednesday, February 16, 2005 5:27 PM
i have a 500/1 and a 300/2. both have preamp outputs. now, dont flame me...i never really knew exactly what this feature allows me to do, because i never actually invested in higher quality audio equipment until now. how i understood it was that i would only need to run one pair of rca's from the deck to the 300/2 and then a short rca from the 300/2 to the 500/1...but where does it connect on the 500/1. i cant find any inputs...

or am i completely wrong.

what im asking, is how many rca's do i need, how long and how do these amps interconnect....?

attached are the related PDF files.
Attachments
300_2.pdf (71k)



Vice President - NEJBody
2007 Cobalt SS
2001 Sunfire (retired)

Re: Interconnect cables
Wednesday, February 16, 2005 5:28 PM
and the 500/1 PDF
Attachments
500_1.pdf (90k)



Vice President - NEJBody
2007 Cobalt SS
2001 Sunfire (retired)
Re: Interconnect cables
Wednesday, February 16, 2005 6:30 PM
if the 500/1 doesn't have inputs...how would you use it at all?? lol.

both amps have rca inputs, and outputs. they should be marked. on your output from your 300/2 you'll have to set it to lowpass, so your only sending the sub signal to the 500/1.

http://www.jlaudio.com/amps/pdfs/300_2.pdf


http://www.jlaudio.com/amps/pdfs/500_1.pdf


--------------------------------------------------------------
Offical dealer for the following-

SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW

Re: Interconnect cables
Wednesday, February 16, 2005 6:31 PM
oops..i thought you were asking for the pdf's, lol.

you'll need one long rca to run from up front to your 300...then a short rca to run from the 300 outputs to the 500 inputs.


--------------------------------------------------------------
Offical dealer for the following-

SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW

Re: Interconnect cables
Wednesday, February 16, 2005 7:57 PM
exactly. thats what i thought....so where are the inputs on the 500/1 cuz im not seeing them on the pdf



Vice President - NEJBody
2007 Cobalt SS
2001 Sunfire (retired)
Re: Interconnect cables
Wednesday, February 16, 2005 8:07 PM
They are on the bottom on the right side.




<a href="http://www.j-body.org/members/vabeachchillin"><img src="http://members.cox.net/vbkevin/sig11.jpg"></a>
Re: Interconnect cables
Wednesday, February 16, 2005 8:25 PM
yea, i seen em..they are even labled. "balanced differential inputs" or something along those lines. heck it even says it on the amp itself


--------------------------------------------------------------
Offical dealer for the following-

SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW

Re: Interconnect cables
Thursday, February 17, 2005 4:52 AM
gotcha....



Vice President - NEJBody
2007 Cobalt SS
2001 Sunfire (retired)
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search