Ok so I have the following amp listed below........I know how most people don't like sony and what not........I have a feeling that the amp many not be good enough for what I want to do but I am looking to see it the following amp can handle 2 JL 10W6 V2's
Sony xm2165gtx
2 Channel
1000 watts (so it says)
RMS Power at 2 Ohms 200 W x 2
RMS Power at 4 Ohms 165 W x 2
anyhelp would be great........
Vicky
<a href = "http://www.modified-motorsports.com"><img src="http://img.photobucket.com/albums/v649/lpvick/Yella%20Cavy/YellowCavySig.jpg">
no, and yes.. The 10W6v2 is a dual 4 ohm voice coil sub, taking 400 RMS per sub. At best, that amp would be able to run at half it's rated RMS power. If you run the subs in parallel, each one will show a 2 ohm load, and the amp will push 200 RMS to each speaker. I'd say go for something a little bigger. Yes this amp will technically work, but won't work nearly as well as one with a little more backbone.
Brakes? I don't need no stinking brakes....I have air bags
http://members.cardomain.com/charlzo_2000
Ok if I was to get another amp I am not looking to spend LOADS of money any suggetsion
Vicky
<a href = "http://www.modified-motorsports.com"><img src="http://img.photobucket.com/albums/v649/lpvick/Yella%20Cavy/YellowCavySig.jpg">
My SPL 1600 watt amp does 380x2 @ 4 ohms.. cost about $150 bucks on ebay.. look into that I guess
Hiphonics or Infinity or JBL amps are all i use.
Lawnmowerracer wrote:Hiphonics or Infinity or JBL amps are all i use.
"Hiphonics -> the amp that pushes your sub and teaches you how to read and spell at the same time!"
"Billy: Look mom! i did it! i read the whole thing"
"Mom: I cant hear you over the music son!"
lol, its hifonics
ok thanks for the suggestion but like how big of an amp........
Victoria
<a href = "http://www.modified-motorsports.com"><img src="http://img.photobucket.com/albums/v649/lpvick/Yella%20Cavy/YellowCavySig.jpg">
try a Rockford Fosgate Punch 800a2 . 400 watts x 2 . around 200 dollars used
____________________
84 Fiero So stock it hurts
Im in the everybody club are you?
It's a tricky thing when it comes to amps. You got two types of amps, one's who say they push 800 watts and only push three like Pyle and Sony. Then you have amps that say they push 300 watts and really hit like 800 like Kicker and Rockford Fosgate. When it comes to amps, especially pushing high end subs like JL Audio I would say it's better to save up than to use something inferior. I would definately check ebay though if you don't want to wait. Hell most of my system is from there. Good luck!
" There is a such thing as too much money for car audio"
2 MA Audio 120XE 12" Subs $100
1 Soundstorm 800 Watt 2 Channel Amp- $135
3/4" MDF Dual 12 Box- $40
JVC KDG-400 CDRW/MP3 Player- $125
Hitting 134 Decibals and being recommended for hearing conservation- Priceless!!!
Thanks for the help I went with 2 W3V2s instead.......I do have some Fosgate amps laying around and right now am running 2 Fosgate XLC but I am just not impressed with there stuff compared to how it used to be for my Fpsgate is below sony!
have never had a problem with my sony stuff so I figure why not just keep it instead of spending more money on amps I really don't need. After speaking with my friend that owns a audio shop I went with the W3v2's because I could keep what I have!
Thanks Again
Vicky
<a href = "http://www.modified-motorsports.com"><img src="http://img.photobucket.com/albums/v649/lpvick/Yella%20Cavy/YellowCavySig.jpg">
