how hard would it be to replace the stock fog lights on an 04 Ls Sport with a set of PIAA driving/fog lights...
1. will they mount in the current location easily
2. how hard would the wiring be to hook up to stock wiring so that the stock switch can be used?

thanks

just put HID's in the stock fog housings.....


01' Z24 5 speed
422whp/400wtq
T4 Turbocharged
Built LD9
HP Tuners

^^^ not without projector fogs...



http://nwgme.org

i mounted projectors in mine



cutoff with halogen



cutoff with HID

ive got a set identicle to the ones above that i will sell you with HID's for 150 shipped

JBod9904 wrote:2. how hard would the wiring be to hook up to stock wiring so that the stock switch can be used?

You'll need to find a 95-99 Cav Dimmer w/Fog and run the wiring that comes with the PIAA lights...

S, Roodman wrote:FOg lamp switch has 3 leads coming off of it.
Pin C - Blk - GRND
Pin B - Yellow - Lamp/Switch tied to Inst LPS fuse
Pin A - Yellow/Blk to foglamp coil.

Cruisin4DrCav wrote:

JBod9904 wrote:2. how hard would the wiring be to hook up to stock wiring so that the stock switch can be used?

You'll need to find a 95-99 Cav Dimmer w/Fog and run the wiring that comes with the PIAA lights...

S, Roodman wrote:FOg lamp switch has 3 leads coming off of it.
Pin C - Blk - GRND
Pin B - Yellow - Lamp/Switch tied to Inst LPS fuse
Pin A - Yellow/Blk to foglamp coil.

so thats why my switch circuit board caught fire in my hand

i fixed it though but now i have to fix the led