i guess this will go into this topic if it dont then more it where it needs to go....i was wanting to add cruise control to a 99 cavalier 2.2L NON ECOTEC...what would i need to do to do it....i can get the parts from the junk yard im just wondering what parts im gonna need and has anyone ever done it before....thanks


I AM the man from Nantucket

http://www.j-body.org/forums/search.php?f=4&search=adding+cruise+control&globalsearch=0&match=1&date=arch&threadtype=&fldsubject=1&fldbody=1


hope this points the way for you

You need:

Control module under thood
Cruise cable from the module to the TB
Cruise harness from the module to the main body plug under the hood.
Connector harness from the fusebox to the cruise column switch to the main body harness under the hood
Cruise column switch
If you have a manual there is an additional switch that is on the clutch pedal to disengage the cruise.

A haynes/chiltons, as well as going to this site as the guy has a real good how to and I used it when installing the cruise on my 04 Eco (ironically the same color):
Cruise install

Took me about 3 hours or so upside down and hunched over to do everything on my car. I cheated and bypassed the main connector under the hood and went staright into the car. Have been using mine for almost 20K now.

Good Luck

i figured id bring this back from the dead. im doing this and i need to know ONE thing. i cant figure it out. on the two break pedal switches theres one part of the harness that has purple and black wires and one with purple and pink. where does the black wire go. just to ground or??? any help is appreciated.