Ok i got a underbody led kit coming tomorrow. Just checking to see if anyone has a underbody kit and tips on the install or some pictures of where they installed the lights and other stuff.

Any input would be nice as long as in not in me..

there isn't much to installing them, one on each side, one under the front, one under the back. just make sure you secure the wires good, if you have lose ones they will rub on stuff or can get cought on things when you drive and if you're luck just kill that one wire.. if you're not it could trash the entire system


._____________________________.
Causa latet vis est notissima

DIY Clear 03+ Headlights

Did someone say pictures??? Install is pretty straight forward, like Grimor said, be sure you secure all of the wires. I even went so far as to cover them with some wireloom just to be sure nothing was going to happen. Let us know how it turns out.

I have heard, use wire tires instead of the screws, and just take your time

Lights on side...

anyone care to share info on screwing in the lights on the side underbody. There is a little lip but kinda hard to get a dril in there. would it be ok to just pop a hole in the underbody itself with out hurting anything inside?

I have mine attached to that... "little lip." I put the light behind it.

I drilled my holes into the underbody behind that little lip. It hides the bulbs pretty well, and doesn't really hurt anything on the inside. When I put my screws in they didn't come through the carpet, although you can barely feel them, but only if you're trying. I had to mount my front tube on that black plastic piece in front of the radiator.

Also, make sure to secure all the wires with zipties, make sure NOTHING is dangling on the underbody.