I'm replacing the door speakers in my girlfriends car...2001 z24...
Anyway, i'm wondering if i need a special tool to get the panel clips out without damaging them...
Also, should i get some extra clips in case they break?? Let me know the easiest way to do this...thanks
BTW, i searched and couldn't find anything? Thanks guys
<img src="http://www.phobia.net/~blackice/images/avatar.jpg">
"I like to live every day as if it were my last, because one of these days...it will be."
you dont need one. just common sense.
so a screwdriver would work to pry them out?
I just don't wanna have to replace all of them is all
<img src="http://www.phobia.net/~blackice/images/avatar.jpg">
"I like to live every day as if it were my last, because one of these days...it will be."
don't even need a screw driver..just pull the panel off. you'll be fine. i've taken my panels off probably a dozen times without breaking any clips.
--------------------------------------------------------------
Offical dealer for the following-
SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW
a screw driver you risk scratching your panels. Just pull them off. make sure you have asll the screws out and pull.
how many screws are there??? just for my information?
<img src="http://www.phobia.net/~blackice/images/avatar.jpg">
"I like to live every day as if it were my last, because one of these days...it will be."
Two by the handle and like 5-6 I think around the bottom sides.
-Chris
seven per door
--------------------------------------------------------------
Offical dealer for the following-
SOUNDSTREAM
DB LINK
DB DRIVE
PANASONIC
GARMIN
ROSEN
SCOSCHE
XE DESIGNS
SOUNDGATE
PAC
LITEGLOW
