These were originally designed by HT Motorsport back in the early 2000s with the help of
Muffin. I have tried to contact Thomas for more information, but haven't heard back. HT Motorsports sold the designs to Held, and then
Arraut Motorsports purchased them from the Held brothers.
These mounts will be manufactured by Arraut Motorsports using HT Motorsports old drawings / Cad models. These units will be of steel construction, and have polyurethane bushings and spring cushions. Arraut had a few old units left in stock and sold them to a few people in Mexico and Puerto Rico. We have confirmed that these rear mounts are designed for stock diameter springs. HT Motorsports also made a front set. I'm working with Arraut to confirm the design. Some of the documentation seems to be missing on the front sets. Thomas aka muffin has a front and rear set on his car. We are just trying to confirm that they are for stock diameter springs.
These rear solid mounts will lower the car an addition 1/2" over the stock rear mounts. I'm still working on information on the drop on the possible front sets. These were designed for third generation J-bodies. 1995-2005.
Prices are as follows.
10 rear sets. $75 shipped.
The TENTATIVE price on the fronts are the same as the rears. This may change, and if/when I can get a firm answer I will update.
We are also talking about a rear set for the coil-over people. We believe the pricing to be similar to the stock diameter springs, but until we confirm a few things. I'm not 100% sure.
Rear Set: Stock diameter springs. $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.
3.
4.
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. $75.00-95.00
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock diameter springs $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.
3.
4.
5.
6.
7.
8.
9.
10.
Edited 5 time(s). Last edited Monday, September 22, 2014 5:25 AM
- Attachments
- 10712778_10203845412828253_3503666577358342454_n.jpg (50k)
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Rear Set: Stock diameter springs. $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.
4.
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. $75.00-95.00
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock diameter springs $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3.
4.
5.
6.
7.
8.
9.
10.
so everyone pays $75 correct?
Austin Stilwell wrote:so everyone pays $75 correct?
"When we get 10 people set up yes. Solid Rear mounts for stock diameter springs will be $75.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Count me in.
Rear Set: Stock diameter springs. $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4.
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. $75.00-95.00
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock diameter springs $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4.
5.
6.
7.
8.
9.
10.
I need an adultier adult.
Had I not gone to Tein SS's I would have been all over these.
"In Oldskool we trust"
Few questions can you sit stock height? Can you run the koni yellow 1/2 shaft? I had one of the first sets of OEM's, and I wasn't happy, the fronts bent and hit the hood. The rears didn't fit very well either. Will they be better construction
I will be in for rear mounts for coilovers. I'm currently running BC Racing BR-Type with Swift upgrade.
Rear Set: Stock diameter springs. $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4.
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2.
3.
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock diameter springs $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4.
5.
6.
7.
8.
9.
10.
"United by Individuality"
"If life is a joke, why aren't we laughing?"
"Normality depends on one's perception of reality."
http://www.cardomain.com/ride/3820803
I'm also running BC Racing BR Type, with the Extreme Low upgrade.
Rear Set: Stock diameter springs. $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4.
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock diameter springs $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4.
5.
6.
7.
8.
9.
10.
R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Rear Set: Stock diameter springs. $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock diameter springs $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.
6.
7.
8.
9.
10.
Spook 427 wrote:Few questions can you sit stock height? Can you run the koni yellow 1/2 shaft? I had one of the first sets of OEM's, and I wasn't happy, the fronts bent and hit the hood. The rears didn't fit very well either. Will they be better
construction
Not sure what you mean by sit stock height. If I recall correctly yellows are a larger shaft diameter than the stock struts. These are designed for the stock diameter. I'm confident they will fit correctly.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
i need a set for coilovers to fit koni yellows...
Let me reword that, I met if you can get them without 1/2" drop? Also koni yellows basically need a 1/2" hole?
Rear Set: Stock diameter springs. $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock diameter springs $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.
6.
7.
8.
9.
10.
Spook 427 wrote:Let me reword that, I met if you can get them without 1/2" drop? Also koni yellows basically need a 1/2" hole?
After talking with Arraut Motorsports again it is actually only a 1/4" drop, and strut travel should be the same as stock, or ever so slightly longer. These will not shorten strut travel.
I have asked about the yellows. Richard is not sure if he can tweak the current design for the larger shaft diameter.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Wouldn't fitting the larger shaft just require the bushings to be drilled out? From the looks of it, they fit together through a hole that's approximately 3/4", so drilling out from 3/8" to 1/2" shouldn't be hard.
Mr. Quick wrote:Wouldn't fitting the larger shaft just require the bushings to be drilled out? From the looks of it, they fit together through a hole that's approximately 3/4", so drilling out from 3/8" to 1/2" shouldn't be hard.
Yes that could be done. Trying to locate larger ID bushings.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Rear Set: Stock / Lowering springs. - 4.25" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.
6.
7.
8.
9.
10.
Rear Set: Coil over springs. Designed for 2.5" Coil-Overs - Specifically BC Coilovers - 1/4" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock 4.875" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5.
6.
7.
8.
9.
10.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
As long as the rear coilover mount will work with my ground control coils I need a set..
Yes yes!!!! I am in!
Rear Set: Stock / Lowering springs. - 4.25" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
6.
7.
8.
9.
10.
Rear Set: Coil over springs. Designed for 2.5" Coil-Overs - Specifically BC Coilovers - 1/4" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.
5.
6.
7.
8.
9.
10.
Possible Front set: Stock 4.875" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
6.
7.
8.
9.
10.
You drive a cavalier? Why yes... yes I do.
Rear Set: Stock / Lowering springs. - 4.25" Stock Diameter spring- Stock Strut shaft diameter. - Koni Yellows would require the bushing drilled for the larger diameter shafts. 1/4" additional drop- $75.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2.Chris Gatti- chriscavie04@yahoo.com- blueboosted penguin -1- pp
3.Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
6.
7.
8.
9.
10.
Rear Set: Coil over springs. Designed for 2.5" Coil-Overs - Specifically BC Coilovers - 1/4" additional drop - $75.00-95.00
1. James MacKenzie - macktruck(dot)mackenzie(at)gmail(dot)com - macktruck84 - Qty: 1 set - Paypal
2. Evan Maddox - TheDizasterChild@gmail.com - Evan Undead - Qty: 1 set - PayPal
3.Phil Duerr - cavfiredesire@hotmail.com - Philly D - Qty: 1set - Paypal
4.
5.
6.
7.
8.
9.
10.
Front set: Stock 4.875" diameter springs & Stock Diameter shaft - - Unknown drop at this time - $75.00-100.00
1. Michael Davis - mdavis at ennotechdesignsllc dot com - -MD- Enforcer - Qty 1 - PayPal
2. Chris Gatti- chriscavie0@yahoo.com-blueboosted penguin-1-pp
3. Jeremey Zamecnik - jrz1333@gmail.com - jrz1333 - qty 1 - paypal
4. James Kellough - james.kellough@gmail.com - - Scorpio1- Qty 1 - Paypal
5. Tyler Ewy - tyler.ewy@okstate.edu - elaztikplaztik - 1 - paypal
6.
7.
8.
9.
10.
Front Set: Coil over springs. Designed for 2.5" Coil-Overs - Unknown drop at this time - $75.00-100.00
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Are these going to be coated or bare?
Coated black.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Just, outta sheer curiosity, When would these be shipping out/able to be purchased?
I need an adultier adult.
This month.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
