Anyone have a set laying around that they are willing to sell...either 3/8 or 1/2?
i made mine, very simple too if you have an old rear axel laying around
I will once I get my stuff needed for the saturn swap...
Vince....any time frame? i would like to get these done the same time i powder my wheels.
^^ I know a guy locally selling a set of 3/8
His name is corkit on here...pm him.
Im sure he still has them for sale.
i got a set of 3/8s from the gp. I cant use them because of my baers. in in Ontario Canada but i can ship.
I have a set of 3/8 that are just laying at my house, run them for maybe 3 months before I took em off to put on the rear disc setup.
Pm me if you interested evofire
i got 2 sets of 1/2" from jeffies gp if you want to buy them. just pm me if you want.
Chris, shoot me a text about this later.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
Does anyone have a diagram? I don't think anyone makes anymore, just the odd ones on sale in classifieds, but then a guy has to pay shipping, etc... I have stuff laying around to make my own so it would be pretty much free, just my time, but then it would save having to take everything apart to measure and then put it back together, make the spacers and take it part again....
2000 Cavalier Z24 5spd - Intake, Dynomax muffler, Hawk Pads, Powerslot rotors, Sportlines/Koni reds, Neon Coil, MSD 8.5 Wires - **SOLD**
2014 Kia Forte Koup SX 6spd - 1.6L Turbo - My new car
2015 Kia Sorento EX V6 AWD - Wifes Car
All you have to do is copy the wheel bearing bolt pattern and the hole for the abs sensor housing to a piece of metal, whatever you have to use. I would, however, suggest you just buy a set of used ones from someone here. They will be ready to throw on, maybe a coat of paint at the most. you might even get a set thats already powder coated. I know alot of time and effort went into the making of jeffie's spacers, so if you find those you will have a great product.
alex priggen wrote:i got a set of 3/8s from the gp. I cant use them because of my baers. in in Ontario Canada but i can ship.
Depending on what rims I get (wink wink), I might want these.
sounds good darren im still working on it.
hey guys i wanna buy a set of these to bring my wheels out to match my front wheels as far as where they sit ..
im willing to pay you so let me know how much and lets get this thing donw
kit would be best with bolts!!
(write what ever comment you want here)
Wow Dave.... you always show up at strange times.
.
Just Dave (2 UNIQ) wrote:hey guys i wanna buy a set of these to bring my wheels out to match my front wheels as far as where they sit ..
im willing to pay you so let me know how much and lets get this thing donw
kit would be best with bolts!!
I will have a set of 1/2 to sell once i get mr quicks brackets. They are the jeffie saturn swap brackets also
Bringing back this thread for a question bout hub spacers. If i understand correctly, the wheel bearring mounts to the hub spacer which is mounted to the knuckle? Also.. Anyone making these still?
ReD RaiN
The spacer goes between the hub assembly and the torsion beam.
Probably have to have a set made. Any machine shop worthwhile should be able to make you a set.
Thats what i was thinking. I looked around online and cant seem to find anything. Unfortuantly here in ontario everything is extremly expensive but im sure itll save on the bearring. Just dumped a load on some new tires so this will have to wait. Thanks anyways
ReD RaiN
