Well i was wondering if there was any camber plates going around other than to mcmoney's, and well i ended up seeing GC's camber plates
although it doesnt say they are for jbodys, they are 3 bolt and universal. Do you guys think it is possible? Looks like ill need to do a little cutting or grinding to give clearance
for the adjusting bolts. I guess its time to email GC and see if the mounting bolts can fit or not.
i saw these and also was wondering if they would work. it looks like they will
Check ebay. There is a seller that sells Jbody specific camber plates ( he doesn't have one currentley listed ).
Jason
99 Z24 Supercharged
157hp/171tq - NA
LD9 for Life
The mount pattern is the least of your worries. Just drill new holes to match whatever plate you want. Find one that will physically fit, and has the correct size bearing for you strut shaft, then worry about the mounting pattern. You can probably find some cheap by doing this. Mine were $30 direct from RRE, made for 2nd gen Eclipses (although I think they forgot to add a zero to the price when they charged it out, either way, they were cheap)
But, IIRC, GC will drill their mount plate to whatever spec you tell them.
Forgive the picture being f'ed up, but mine are Stillen Camber plates for a Maxima. Simply drilled new mounting holes as mentioned above.
__________________________________________________________________
Performance cars do not win car shows and show cars do not win races.
It's up to you to decide which you'd rather win.
Ian Lacey wrote:Forgive the picture being f'ed up, but mine are Stillen Camber plates for a Maxima. Simply drilled new mounting holes as mentioned above.
Holy negative camber batman!!
