i just got it to fit but i was told i put it on wrong so does anyone have any pics of them installed thanks in advance
Ummm, there's only really one way to put the thing on.
As long as the firewall mounting part in the middle is facing down and touching the firewall then its on correctly.
-M
Remember....syringes go in the RED waste basket.
yup only 1 way to put it in
he bar goes up against the firewall
so if the bar isnt close to the firewall its backwards
i guess i have it backwards but its fit pretty good the way i have it thought
ptv177 wrote:i guess i have it backwards
That's what we're here for.
Here this pic might help ya.......
Car is for Sale!Supercharger kit is for sale!
thanks i guess it wont fit on my ecotec because of space issue
My car was made with wrenches, Not chopsticks.
it will fit the eco , you just got to be alittle creative
also dc sports sells 1 that fits with no modifaction for the eco
The GM bar will fit on any 95-05 regardless of engine. Like JDM said, you may have to be a bit creative.
Quote:
The one I have has two mounting tabs for the firewall. Is this normal????
yep. part of the added structure for the verts
use the mounting tabs. drill a hole in the firewall, throw a bolt and washer in there, and a nut on the other side. you'll totally notice a difference in the front in with that strut bar bolted to the firewall.
Desert Tuners
“When you come across a big kettle of crazy, it’s best not to stir it.”
When i had mine i used a bolt to attach the middle part ot the firewall of the car through the piece that lay flat on the firewall.
I have since sold the car and i have the same bar on my wifes Chevy Malibu. If you have a malibu it fit with no modifcations.
2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time
FReQ Z wrote:use the mounting tabs. drill a hole in the firewall, throw a bolt and washer in there, and a nut on the other side. you'll totally notice a difference in the front in with that strut bar bolted to the firewall.
This may be a dumb ? but do you need to remove the dash to be able to attach a nut to the back side of the bolt. I don't really want to just ream a big self tapping screw through the firewall and whatever is on the other side.
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
the thing on your winsheild wipers comes off and lets you reach down there
My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again
just remove the 4 holding that side. it bends relatively easy.
be very careful you don't drop your ummm... nut.
Desert Tuners
“When you come across a big kettle of crazy, it’s best not to stir it.”
[quote=97cavie24ls(JDM&00s/c sedans™)]it will fit the eco , you just got to be alittle creative
Wade Jarvis wrote:
This may be a dumb ? but do you need to remove the dash to be able to attach a nut to the back side of the bolt. I don't really want to just ream a big self tapping screw through the firewall and whatever is on the other side.
Come on, Wade. Where's your sense of adventure? LOL...
Those extra brackerts line up for those with Cruise mounted on the firewall right?
No, cruise is mounted right between the tabs.
