I think I may have better luck selling the car with an aftermarket wheel, and I don't want the car around long enough to build the one I planned. If anyone is selling one let me know. Anyhow, where do you recommend I buy a cheap one and what install (hub?) stuff do I need? I searched the interior forum but didn't get the answer I know has been covered before.
Thanks.
^CLICK ME TO SEE HOW I BUILT EVERYTHING^ How To in Interior Forum
you'll need the wheel and hub...
if you pick up a 6 allen bolt wheel, you'll need the momo hub adapter. can't remember who makes the 5 bolt hub adapter. grant perhaps?
look on ebay for cheap wheels.
I appreciate the advice. However, my intentions are to sell the car immediately so I don't want to spend hardly anything at all, let alone $300. Just something to throw in so people don't walk away because of the stock chopped up wheel.
Here is the one I bought for $30.
Now, this is a 6 bolt wheel I assume. Can someone please direct me to the complete install stuff I need from eBay?
Thanks again for everyones advice so far.
^CLICK ME TO SEE HOW I BUILT EVERYTHING^ How To in Interior Forum
if you get a hub kit for a pre 94 you can get them at advance or the zone for about $20.00. as far as your air bag light you can pull the bulb. i have a stock wheel off a 2000 charcoal if you need one.
I drive a 98. The auction says up to 94. Why won't the one work that I posted above?
^CLICK ME TO SEE HOW I BUILT EVERYTHING^ How To in Interior Forum
pretty sure that the wheel spline pattern is the same for 1st-3rd gens.
the one you posted should work, i didn't see the auctions you had posted up. as i said in my post, one of the quick release hubs should also work
Your link is not for my year, according to the seller.
^CLICK ME TO SEE HOW I BUILT EVERYTHING^ How To in Interior Forum
