Part Out Feeler... - Mid East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Part Out Feeler...
Monday, December 28, 2009 6:31 PM
I am trying to decide what i want to do and if i want to finish the cav. Here are some parts that i have that i might be getting rid of...

-Modified HO cams, stock cam tower modified for 35mm lifters, HO exhaust cam tower, and new 35mm lifters - $400




-Modified pacesetter header for 3" downpipe, custom 3" down pipe, 3" Magnaflow cat, 3" custom tubes exhaust, 3" dynomax ultraflo muffler, vband clamps, uses all stock mounts - $550










-03' lss front bumper, needs paint - $100
-2000 z24 trunk with holes for the spoiler, red in color - $100
-086 head, 80k miles - $100
-2.3 complete Lo short block-$100
-HO cam towers, intake and exhaust - 50
-2.3 HO springs and retainers, full set - $100
-Atomic 2.3 turbo header, brand new, never used - $450





-HO mani with phenolic adapter, ported to match, powder coated with some scratches - $100
-Stock fuel with fuel pressure gauge - $50
-65mm throttle body - $200
-42 lb green tops fuel injectors- $100
-External coil swap - $150
-Un -modified set of N-body aluminum control arms - $75


I am also possibly looking to sell the cav. Its an LD9 swapped 03', yeah that's not a typo. Body has 130k, engine around 90k. It might be the only 03 with an LD9. It is lowered on prokit/agx's, has the rksport carbon fiber filler panel, custom subframe brace, panasonic mp3 player, lss wheels with brand new bridgestone potenzas, spec stg 3 clutch, spec aluminum flywheel, team green lsd, TTR upper engine mount, TTR lower engine mount, and TTR Trans bushings.

Here are a couple pics




I am just trying to see if there is any interest in any of the parts. Let me know if you have any questions. Thanks






Re: Part Out Feeler...
Monday, December 28, 2009 9:41 PM
YOU HAVE A PM.





Trailer Queen corvette wanna-be with 40 coats of wax and powdercoating that soaks in.
Re: Part Out Feeler...
Monday, December 28, 2009 11:25 PM
would you ship the lss bumper?




Re: Part Out Feeler...
Tuesday, December 29, 2009 12:51 AM
nooooooooooo,


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: Part Out Feeler...
Tuesday, December 29, 2009 5:17 AM
What theeeee????










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Part Out Feeler...
Tuesday, December 29, 2009 6:13 AM
I am trying to decide what i want to do with the car. I need to buy another car for a dd if i am going to do anything further. I want to get a cobalt ss. TC would be nice but I think I can get a SC one and still keep the cav. But with a wedding coming up and wanting to buy a house it might be hard to do everything I want. What I might do is keep all the parts and sell the just the car. I could then buy a base model and make mostly a weekend race car and really do what i want with it. The 03 is fully loaded and is heavy as @!#$ lol. So we will see. I am waiting to hear if i will get hired where i am working now after I graduate this spring. If I do get the job i really wouldnt have to worry about anything. So i am just seeing what kind of interest there is for everything. I guess i could buy the 408 hp cav in the other region lol, but i want something different than a cav...

So we will see what happens...







Re: Part Out Feeler...
Tuesday, December 29, 2009 10:58 AM
from experiance, keep what you got. i loved having my power windows and @!#$.
get a ss/sc not a tc, there way too over priced and are a pita.
sc coblat can be had under 9g's, i know i looked for them lolz.


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: Part Out Feeler...
Tuesday, December 29, 2009 11:40 AM
I am thinking about picking up a cobalt ss s/c and possibly keeping the cav. I dont really know what i am going to do yet lol.






Re: Part Out Feeler...
Tuesday, December 29, 2009 11:22 PM
PM sent.



Re: Part Out Feeler...
Wednesday, December 30, 2009 12:52 AM
jmarks82 wrote:I am thinking about picking up a cobalt ss s/c and possibly keeping the cav. I dont really know what i am going to do yet lol.


i miss my car more and more everyday. i couldnt bring myself to get another one.


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: Part Out Feeler...
Wednesday, December 30, 2009 1:25 PM
would the 01 lss bumper fit on a 2004 cav? you are PM'd









And now you are reading my signature...great
My 2004 Sunburst Orange Sedan - http://www.j-body.org/forums/read.php?f=47&i=54063&t=54063
input is highly appreciated!

Re: Part Out Feeler...
Wednesday, December 30, 2009 2:57 PM
Well i am going to look at a cobalt tomorrow, if i get it here is what will be forsale...


-Modified pacesetter header for 3" downpipe, custom 3" down pipe, 3" Magnaflow cat, 3" custom tubes exhaust, 3" dynomax ultraflo muffler, vband clamps, uses all stock mounts - $550











-2000 z24 trunk with holes for the spoiler, red in color - $100
-HO cam towers, intake and exhaust - $50
-2.3 HO springs and retainers, full set - $100
-HO mani with phenolic adapter, ported to match, powder coated with some scratches - $100
-Stock fuel with fuel pressure gauge - $50
-65mm throttle body - $200
-42 lb green tops fuel injectors- $100
-External coil swap - $150







Re: Part Out Feeler...
Wednesday, December 30, 2009 8:48 PM
i definitely have dibs on the throttle body.



Trailer Queen corvette wanna-be with 40 coats of wax and powdercoating that soaks in.
Re: Part Out Feeler...
Thursday, December 31, 2009 9:47 AM
So Ill take that as a no on my PM.



Re: Part Out Feeler...
Thursday, December 31, 2009 11:04 AM
pm sent



Re: Part Out Feeler...
Thursday, December 31, 2009 3:57 PM
what about the lss kit? would you ship em ?



Re: Part Out Feeler...
Thursday, December 31, 2009 7:18 PM
azncav wrote:what about the lss kit? would you ship em ?

Sorry no probably not. Everything that is forsale is in my last post...





Re: Part Out Feeler...
Friday, January 01, 2010 12:04 AM
I going to drive to Toledo and kick you in the balls


PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: Part Out Feeler...
Friday, January 01, 2010 11:47 AM
-MD- Enforcer wrote:I going to drive to Toledo and kick you in the balls


I can still buy one of your pulleys...









Re: Part Out Feeler...
Friday, January 01, 2010 4:24 PM
-MD- Enforcer wrote:I going to drive to Toledo and kick you in the balls


Hey as long as its not the turbo car



Re: Part Out Feeler...
Friday, January 01, 2010 4:52 PM
YEah that still good


PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Re: Part Out Feeler...
Saturday, January 02, 2010 12:49 AM
-2.3 HO springs and retainers, full set - $100
-HO mani with phenolic adapter, ported to match, powder coated with some scratches - $100

Id like to buy this


"Straight roads are for fast cars, turns are for fast drivers"-Colin McRae
Re: Part Out Feeler...
Saturday, January 02, 2010 5:34 AM
Yeah i finally decided that with all the stuff that is going on it is time to get a different car. The turbo car isn't going anywhere. It would have been a pain to have 2 cars to work on all the time. So i bought a cobalt ss and i am going to sell everything i have. I will be making another thread with ALL my cav parts. Thanks!





Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search