i have a couple things for sale. this is what i want for them- secret cams $120....adjustable fuel pressure regulator $65....blue aem short ram intake with drilled hole by elbow-i used this for my wet nitrous setup $100....stock 2.4 throttle $25....bored,machined throttle $50(i got pics so you can tell the difference).....i have pictures of everything and will send to only serious buyers buyer pays for shipping or if close we can meet. i'm located 45 minutes from louisville,kentucky you can pm here or e-mail me at fernandorios20@aim.com or at listed e-mail
also i have stock tails let them go for like $10-$15 and a carbon fiber hood i want at least $150 like i said i have pics of everything if your serious about buying then i will provide pics
are you north or south of lousiville??
what kind of hood is it? any damage? chips, scratches, anything?
![](http://img641.imageshack.us/img641/1227/sig1i.jpg)
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
there is some scratches and surface damage around the cowl and ends. i was told that all i would have to do is wet sand it and re-clear coat it and wax it but never did. it looks like the ss hood but more boxy. if you click on my profile i got some picture sof the car with the hood. or i could e-mail the pics i took to you. i'm southof louisville near fort knox
yea send me some pictures of it man
also, would you be willing to meet halfway if I give you a tank of gas?? lol
Im in columbus, ohio
![](http://img641.imageshack.us/img641/1227/sig1i.jpg)
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
sent some pics to the e-mail thats in your registry. i would be willing but i'd have to find someway to transport the hood i don't have my Z anymore so the hood is just chilling in the shed
so you say that all it needs is wet-sanded, buffed and waxed and it should be good to go?
Let me know, I'm def interested if thats all that needs to be done for it to look new again. Let me know if/when you have a way to meet somewhere, and where. Thanks!
![](http://img641.imageshack.us/img641/1227/sig1i.jpg)
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
i was told all that needed to be done was for it to be wet sanded, re-spray it with some clear coat because there was some clear coat damage, and to wax and buff it to get it looking nice. i'll ask around and see if any of my friends will drive me or let me use a truck or van. now i'm not gonna lie to you there is one thing i saw that i wouldn't know how tofix but maybe a good body shop could.... the far corners on each hood are worn from putting the hood up and down
would you be able to get some pics of each corner for me??
If you could possibly, what days are you available to do anything? Im off every Fri and Sat, but this sat I'm putting in the secret cams
![](/global/images/emoticons/ab.gif)
so unless you would want to meet up EARLY like 9am then sat is out of the question for me
![](http://img641.imageshack.us/img641/1227/sig1i.jpg)
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
i'll have to do it later on today but yeah i could do that right now i'm not too sure about what days i am free but when i find something out i'll let ya know. i still gotta find a ride. but yeah i'ma take my ass to sleep i gotta p.o.s. civic i gotta work on tomorrow
yes it's for the 2.4. not too sure i wasn't told when i got it off someone else all he said was watch your rmps now then switch the stock one and watch now it was a considerable difference. i got pics of both i'll send them so you can tell. i'm guessing its like a ho or 60mill.
pics sent to your hotmail
ok. so would you be able to get me some pics of the cowl area at an angle. Like not straight on, say a 45 deg angle? and close up too, and one more as if you were looking at it on a car with the hood shut, same angle but a low kinda shot? Thanks!
![](http://img641.imageshack.us/img641/1227/sig1i.jpg)
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
yeah i'll do that for ya today
i have no way into which i can transport the hood by myself. let me know if you still want the hood and i'll hold it for you...but i don't have a way in which i could meet you with the hood..
eh, nevermind then. Fort knox ky is just a little too far for me...5 hours and some change
![](http://img641.imageshack.us/img641/1227/sig1i.jpg)
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
The cams still forsale?
can u find out a shipping price to logansport indiana 46947?
the cams are still for sale......do you need pics? i'll figure out everyones shipping details tomorrow...everyone have a Happy Thanksgiving
so u decided not to throw the cams in? i kept meaning to meet up with ya one day to throw them in, but have been busy. i was just in fort knox last night though
http://jbok.org
well i ended up going thru another motor and said f*** it and sold it...it sucks i never got to feel the difference,lol. but oh well..i mean that car ended up costing me a lot more money than i anticipated but i guess thats what you get for beating the @!#$ out of it,lol.
what kinda fpr you have??
![](http://img641.imageshack.us/img641/1227/sig1i.jpg)
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |