Well, I went through my garage and I want to get some of this crap out of it.

Stock 2.4L IDI cover - $25


Stock Sunfire GT Muffler Hangers (driver's and passenger's side) - $10 together


Cruise Control Module (not sure on condition) - $15


Stock 2.4L lower engine mount - $15


Stock 2.4L isuzu trans mounts - $10 each, $15 for both


Stock 2.4L EGR adapter, the part that connects the egr to the head (including all bolts) - $15


Stock shifter for 95-99 (isuzu trans) - $15


Polyurethane Sway Bar endlink bushings (never been used) - $10


Quad 4 throttle cable bracket (I believe it is off a 95) - $5


Stock intake system, including filter - $30


Stock 2.4L throttle body - $25
Stock 2.4L intake manifold with egr pipe - $50
Both - $70


Stock hoodliner with connectors - $10


OBD1 ignition computer - $100
2.4L Complete ignition setup (coils, cover, wiring harness, connectors) (not sure on condition, but all look fine) - $30, but will seperate
2.4L Coil cover - $10
2 2.4L coils (one doesn't work, the other one worked fine when removed) - $10 together


Stock 2.4L exhaust manifold with egr - $30


Stock Sunfire GT dual mufflers - $25


Rockford Fosgate 12" P1 - $40 each
Sealed carpeted box with speaker wire terminals for 2 12" subs - $75


Sealed box for 2 12" subs - $50


Kenwood 2 channel amp, KAC-7202, 300W X 2 @ 4 ohms or 920W @ 4 ohms bridged - $100


Everything is OBO and shipping is extra. Both boxes are built out of 3/4" mdf, seperate chambers for each sub, and sealed with liquid nail.

Post any questions here, i can take more pictures if you want. Please pm me or email me if you are interested in anything. My email is in my profile.

Would you sell seperate just the plastic S-tube intake?











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Polyurethane Sway Bar endlink bushings (never been used) - $10 I think I'm going to get these from you, but do you still have the hardware for them somewhere too? I just want to get the 95 as good as I can get it for now. Looks like the only things I need. I might need to get that 2.4 exhaust manifold off you. So hold that for me, but I don't want to pay 30 unless you have the stock flex downpipe.

whitecavy - I would rather sell it as a whole, but if no one will take it, I can seperate them

trdcavfire - the only hardware I have with them is the washers, they were either only an endlink kit or I used the rest of the hardware, I don't remember.

Cool man.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

I will take them I guess. I might just toss the in with stock hardware. We will have to meet up sometime. I think this weekend I'm going to do my best to get the 95Z runnin' cause today I got the last gasget that I needed. So everything seems like a go, and engine is almost out.

trd - check your pm

I did, and I must say you are missin' out not bein' around C-Bus.

It's only 3 long months till I am back down there.

But endlink bushings are sold..... everything else is still up for sale

can i gety pix of teh duals?

check pm

bump, anyone want anything?

You sir have a PM.

KevinP (Stabby McShankyou) wrote:
and I'm NOT a pedo. everyone knows i've got a wheelchair fetish.

IDI cover sold

john harrington wrote:You sir have a PM.

now you check your pm

haven't heard anything, idi cover back up for sale