Well first off, I want to build an ecotec and swap to a 5spd. i have the motor and trans sitting in my garage. So since its getting winter time, i want to pick up a winter beater, and as soon as i do. i'm selling the turbo kit for the 2200.
http://www.j-body.org/classifieds/engine/42127/
I'd like to get $2000 for everything, with megasquirt tuned for 10psi and wiring
Stock my car makes about 85whp.. 3spd auto tranny 2200 engine with 111xxx miles on it, on 4 psi tuned really crappy, (literally street tune on the way to the dyno) I made 127whp and 138ft. lbs... right now its at 10psi and pulls like no other, i love it. But i want more. i might dyno it one more time before i sell it but we'll see.
I also have a stock z24 (95-99) spoiler, manta green is the color has wiring for thrid light
i really want to get rid of this, $30 obo +shipping.
stock 95-99 tails
$20 plus shipping
stock ecotec head everything but rocker followers and lifters and cams
ON EBAY
Stock 2200 fuel rail
Stock 2200 FPR
injectors
(4) 30lb/hr ford red top injectors (used)
98 2200 intake manifold
Injector cover 2200
and lots of other things for the 2200, and a few for the ecotec. let me know what YOU need i'll see if i have it and we'll work out a price
MOST OF THIS I JUST WANT GONE, so no reasonable price will be refused.
Alright the starter went out on the cavy, so i'm just going to put it away for the winter, and tear everything out. So everything is for sale
all the mods are in my profile, if you want anything let me know
anything i don't need for the ecotec i am not keeping, so throw some offers up. i can pictures of items if need be
UPDATE UNTIL SUNDAY
turbo set-up goes for 1500 until sunday, must have cash/paypal by sunday
New Link to Turbo set-up
i'll have pictures up later of everything i have
GUYS and GIRLS
I am PARTING OUT everything in my car all i want is a shell. everything is
BEST OFFER
Engine:
* Car customs Upper engine mount
* Custom bored 56mm Throttle Body
* Megasquirt v2.2 running just fuel for now
* 30lb/hr red top injectors
* t3 .60/.48 50 trim
* Custom charge pipes
* JRC Frount Mount Intercooler
* 1g BOV
* TurbXS boost controller
* Port and Polished head (done by me)
* Car Customs SS Valvles
* New OEM Valve train (besides valves)
* Felpro Head gasket
* EGR removed with a 99 cyl head and IM manifold
* Custom bored Intake manifold
* 2.5" Turbo back exhaust with Magnaflow muffler
* SS auto crap external wastegate set at 5psi for now
* 10psi through Ebay Log manifold
Suspension/Wheels/Brakes:
* Steelys with rubber on them, 2 have great rubber. 2 not so great. with hub caps also.
* Gm strut bar
Exterior
*stock gray bumpers BEST OFFER need these gone
*Stock 95-99 tails
*stock z24 rear spoiler (95-99)
Interior:
* Stock seats, a little stain but i'm sure they can be cleaned.
* Auto shifter from a Achieva
* Autometer boost and oil pressure gauge and tranny temp
also some Knock off Mr7's just the rims one is cracked, holds air for about a day or 2, but can be fixed if you have access to a tig welder. looking for $125 for all for with no tires..
If you want pictures of anything let me know, PM or reply with offers
lol no, that stays with me. plus its cut like crazy to fit the FMIC
come on people no body wants anything?.
if you need parts in general for the 2200, ask me. i have everything, and will sell anything that i don't need
yes, one that compresses air to about 10psi, and garuanteed to give you more than 5 whp
..
JHOUND (Dracos) wrote:Got a 2200 air intake?
i got most of the stock intake also, i forgot about
lol i'm the only one posting in this
the motor is up for sale too, it runs strong last compression test, was around 170 across the board. also the 3sp tranny if any one needs these, i will sell for cheap or they will be junked
people i need this stuff gone, had lots of emails but not a single buyer yet.
how much for the engine mount and throttle body?
throw me an offer, maybe we can work something out
