balancing shaft question - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
balancing shaft question
Tuesday, July 14, 2009 8:42 PM
befor you say SEARCH, i have, i bought an LD2 to put in my 95 sunfire gt, first question is does it have balancing shafts? second, if they make it were can i get a delete kit? third if its simple does someone have a write up saved they can just post it? last, how much vibration am i going to have with removing... thanks

Re: balancing shaft question
Tuesday, July 14, 2009 8:55 PM
first- if you bought an 'LD2' you'd better make sure its the 95 2.3, because if its any other year your going to need to modify things to get it to work. if you got a 95 2.3 then to answer your question about the balance shafts-yes, just like the 2.4, it does.

and no, no known 'delete' kits exist. just a good old (non 95) 2.3 oil pump swap is all we got. j body performance suposidly made balance shaft BLANKS but these dont delete them and good luck getting ahold of jbp.

vibration? only the 95-02 gm panzy ass gm engineers could feel a difference in vibration between these engines.



PFFT secret cams?! pm me if you want a real upgrade.
Re: balancing shaft question
Wednesday, July 15, 2009 4:54 PM
the fellow i bought it from said it was out of a 89 or 90 skylark, does that mean im balance shaft free?
Re: balancing shaft question
Wednesday, July 15, 2009 5:55 PM
Try jbodyperformance.com for your balance shaft BLANKS. Thats where I got mine for the ld9. They might have them for the 2.3.
Re: balancing shaft question
Wednesday, July 15, 2009 6:05 PM
^^^ when the hell did you get em though, jay?



PFFT secret cams?! pm me if you want a real upgrade.
Re: balancing shaft question
Wednesday, July 15, 2009 6:54 PM
thanks for that, i will be in contact with them
Re: balancing shaft question
Wednesday, July 15, 2009 7:13 PM
Brad I got them like two years ago.
Re: balancing shaft question
Wednesday, July 15, 2009 7:20 PM
I'd like to see the difference in performance between the 2.3 conversion and the balance delete.
Re: balancing shaft question
Wednesday, July 15, 2009 9:12 PM
thats right. two years ago. when they actually were in business.

try to contact them though...



PFFT secret cams?! pm me if you want a real upgrade.
Re: balancing shaft question
Wednesday, July 15, 2009 11:10 PM
I didn't realize they went out of business.. Wouldnt they have shut down their web site though?

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search