alright i just put my CAI on my 2005. the part where the intake meets the throttle body dosent connect really good i was wondering if anyone else had this problem. I have the short silicone hose on the throttle body but it came off anyone have any suggestions on what i should do?
you could purchase a longer silicon connector so that it would have less chance of falling off. Shouldn't cost more than 5 dollars?
- 2003 CHEVY CAVALIER LS SPORT ECOTEC -
- Current Mods -
-- Vibrant Exhaust & DC Sport Header --
-- Lower Motor Mount & TTR Upper Motor Mount --
-- B&M ShiftPlus & Vibrant Front STB --
-- K&N Typhoon Short Ram Intake --
RIP DAD<3 We love & miss you so much!
i used a small hose clamp to keep mine in place, and just so i knew it wasnt going anywhere
the orange hose should slip over the tb , then the large plastic tube should slip over the tb
then you use the hose clamp on the outside of the black plastic tube , the last 1 i did had a lip the clamp droped on to , then once it was tight , i couldnt pull it off the tb
the hose that goes from the elbow to the cam cover , i had my friend get a 1/2 id hose , the 1 they supplied was to big
