Didn't know if I should ask this here or Maint. forum but can the 2.2 delete pulley be used on a 2.4 or are there any big differences?



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

bump

Will not bolt up.
End of story.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

spank you spank you very much lol



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

thanks MD and guess I don't need that pulley BIGBOOST but still interested in the IDI cover,I'll pm ya.



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

i didnt know the 2.2 used a pulley for the delete

just the 2.4 and 2.3

Eric I use to have the part number for the 2.2, but never used it and lost it, because all the 2.2 folks just used a smaller belt.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

i always thought they never had , all the belt routing diagrams i remember showed the shorter belt routing

been for for years , and never knew about 1 for the 2.2 , guess your never to old to learn something , LOL

yeah Ebay has a bunch of the 2.2 delete pullies just none for the 2.4.I was looking for one cheaper than gmpartsdirect



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

I might be taking mine off again, and running a smaller belt again. If I do I'll look you up.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Yeah were are you guys getting your 2.4 delete pulleys? I have to to take my head off so while im in there, I decided I dont want my stupid A/C











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

David I got mine from GM.
GM bypass pulley 2.4L p/n # 24574519
Got mine for like 52 bucks from GM parts direct.
GM PART # 24574519
CATEGORY: Water Pump Pulley......No idea why it in this category.
PACK QTY: 1
CORE CHARGE: $0.00
GM LIST: $70.29
OUR PRICE: $41.67
DESCRIPTION: PULLEY

Looks like it is even cheaper now.



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Thanks Mike, Im about to get this











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Btw, you use the stock A/C compressor bolts for this pulley right?











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

yes

^^Thank you











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

not a problem

can't I use a smaller belt with the 2.4?


LD9 F23 FTW!!

Yes,Is what I did after taking out the a/c compressor.But after trying 5 diff. belts the one I went with fits fine but is still a little tight.Somedays upon startup it'll squeal for 15 sec. then go away.I just use belt dressing on it to help with the squeal and condition the belt.



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"