How does GM Rate injectors - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
How does GM Rate injectors
Friday, May 26, 2006 3:42 PM
I have the 2.4 S/C Reflash and the injectors are 310cc or 30#. At what fuel pressure are they rating these at?




Re: How does GM Rate injectors
Friday, May 26, 2006 3:44 PM
Usually aftermarket is at 43.5 psi, but GM does strange things all the time.


15.3 @ 89.97mph, 14's on the way?
Re: How does GM Rate injectors
Friday, May 26, 2006 4:27 PM
GM rates thiers at like 55psi, which overrates all thier injectors.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: How does GM Rate injectors
Friday, May 26, 2006 6:56 PM
GM runs many different pressures. 40 on some vehicles, 50, 60, 65, etc. on others.

I have never, ever seen any GM document that rated any production injector in "lb/hr" or "cc/min" no matter what the rail pressure was or wasn't.

So I have no idea how they could " overrate their injectors".

I have seen org posts that claim XXXlb/hr, etc. for stock injectors. But I have never, ever seen anyone that showed they had one or more flowed to find out that #.


BTW, all the production spec sheets I have ever seen were rated in grams/sec.


sig not found
Re: How does GM Rate injectors
Friday, May 26, 2006 11:37 PM
I dont know where the info I have came from........ (well, I know where I got it, but not sure where it came from before that) but I was told they where flowed to 29.5lbs/hr at I believe the Indistry norm of 43.5psi........ but I could be wrong........

I did notice with HPT that the S/C reflash had the Inj. Constant at 0.32359, the stock '99-'02 2.4 @ 0.20250, and the stock '02 EcoTec @ 0.17760.......






SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search