Lifters for Secret Cams - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Lifters for Secret Cams
Saturday, January 14, 2006 4:15 PM
What lifters are people using on the cam swap. I am going to be putting mine in another engine. My current engine is gone. So we are going to take out the cams and put in to the used engine i am getting. I didn't change my lifter last time and had no issues and i change my cams at about 36,000 miles. This used engine has 35,000 miles on it. I am wondering if i should change them or not.
I heard some people may be using the 2.3 lifters. Who has used them. Can i get them from Autozone or Discount Autoparts. Thanks



2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time



Re: Lifters for Secret Cams
Saturday, January 14, 2006 4:22 PM
did you get any valve tapping? or any other noise from the secret cams?
just wondering
Re: Lifters for Secret Cams
Saturday, January 14, 2006 6:18 PM
I heard you can use the 2.4 cams.. Ive heard that from JBP and Mantapart.. Ive emailed both with the same question.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Re: Lifters for Secret Cams
Saturday, January 14, 2006 7:03 PM
no tapping it was just fine using the stock lifters. I may do the same a couple of us here in FL have the stock lifter with no problems at all.

i was just wondering if the lifter from the 2.3 would be better or the 2.4 lifters are fine.


2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time


Re: Lifters for Secret Cams
Saturday, January 14, 2006 7:24 PM
Well,
You'd have to port the 2.4L cam carrier bores to 35mm.

But other than that, the normal 2.4l lifters are fine.

-M


Remember....syringes go in the RED waste basket.
Re: Lifters for Secret Cams (now springs
Sunday, January 15, 2006 8:33 PM
what about springs what car can i use them from. will they make a difference. Where can i get them from. Is there another 2.3 engine or quad engine i can get them from.


2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time


Re: Lifters for Secret Cams (now springs
Sunday, January 15, 2006 8:49 PM
Springs are still 2.4L springs since its still the 2.4L head.
Mantapart stiffer springs if you can get them.

-M


Remember....syringes go in the RED waste basket.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search