Can someone let me know the stock crank pulley size of a 2.4. Tried a search and no love. And no I cannot measure my own seein as I do not have a J-body. bassically need help for research. Thanks in advance.
2002 Z28: Slp coldair Pac, Corsa Catback, 3200 stall
i would but im at work
and extra crank pulley is at home
Thanks anyway bro, if you could let me know when you get a chance that would be awsome. Otherwise I gotta crawl under Blacks Z24 and I just had surgury so deff not in the mood lol
2002 Z28: Slp coldair Pac, Corsa Catback, 3200 stall
I just measured mine and its 6 3/4" from one side to the other lol.. I hope thats what you were looking for.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Awsome, thats exactally what I needed. Thanks a million
2002 Z28: Slp coldair Pac, Corsa Catback, 3200 stall
^^ No problem man.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
outter groove to outter grove is closer to 6 1/2" , there is a lip on the back that is 63/4"
and 5 1/8" for the HO crank pulley
best i can tell on the 2.0s/c motor i got its crank pully is close to the 2.4's pulley size , and they use a 3.35 to get 12 or so psi
The pulleys are close enough, which is good. Granted boost is relative to you motor's restrictions. So it will kind of be general spec'd numbers when I list boost #'s. Thanks for the info also Cav
.
2002 Z28: Slp coldair Pac, Corsa Catback, 3200 stall