Courtesy of G-Watkins.
-M
Remember....syringes go in the RED waste basket.
4-2-1 ................... Nice......................
Nice quality too.......
Lee
JDM Civic Hatch
Status: Parting Out Turbo Kit....
14.224 @ 102.01MPH @ 5.5psi.... 2.3 60'
Next: Civic JDM B16a2 w/GSR LSD Turbo - Goal 300whp 1400lbs...
that's the quality i expected out of DC. Nicely done.
I was a retard, and now I'm permanently banned.
and since it isnt in the pics , the other side of the flange has been machined out for the egr passage on the 96-98's
thats pretty much what mine looked like
Thats a nice piece, too bad the eco header wasn't nearly that nice IMO. Otherwise I would have purchased it.
12.770 @ 111.99 Intercooled Eaton M62
Quote:
the other side of the flange has been machined out for the egr passage on the 96-98's
Yup,
He mentioned that in his email.
I like the header because its looks pretty easy if you wanted to go wiht a 2 1/4" or larger downpipe/flex pipe or straight pipe.
Or if you wanted to extend the O2 sensor to the 2-1 junction or whatever.
Props to DC.
I like it.
Hope to get in on one.
-M
Remember....syringes go in the RED waste basket.
Sweet!!! Nice pics
Has anyone measured the primaries yet??? Looking at the pics, it looks like the primaries are around 1.5". I am curious to know because the ports on my head are 1 3/4" and I know the pipe is not that big !!
Jason
99 Z24
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
Never measured one but i think* 1 5/8" OD Tubes.
Anyone interested in one email us.
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
to bad it probably isnt going to fit the pre-99 nbodies
Click the banner to enter the best Quad4 & Twin Cam site on the internet.
im more concerned about it fitting Jbodies with quads in them...considering all we currently have is a HO manifold for Lo drivers and for HO cavs...well...we aint got much choice...i was thinking about getting this header and welding a HO flange to match the head...but i think the runners are gonna be too small for an 086 head...anyone know?
FACT : Statistics show that you are more likely to to be hit by lightning than to die street racing.
FACT : It is our American RIGHT to own a GUN but not to drive a car.
"Those who would sacrifice freedom for saftey deserves neither Freedom nor safety!" - Benjamin Franklin
"The real destroyer of liberties is he who spreads among them bounties, donations and benefits." -- Plutarch
www.the-race-shop.com makes a header for the 2.3L Its doesnt fit the 95 jbodies, but it might with some mods, or they might be able to make one work for your application im sure.
Click the banner to enter the best Quad4 & Twin Cam site on the internet.
where at and how much for all that
^^ im aware of the header..and since ill be up AT the race shop in a month or so having my engine put in were gonna TRY to fit that header in...we may have to cut off some of the subframe to open up the downpipe opening..this header is pretty big..but if all goes well THIS is what will be in my cav
FACT : Statistics show that you are more likely to to be hit by lightning than to die street racing.
FACT : It is our American RIGHT to own a GUN but not to drive a car.
"Those who would sacrifice freedom for saftey deserves neither Freedom nor safety!" - Benjamin Franklin
"The real destroyer of liberties is he who spreads among them bounties, donations and benefits." -- Plutarch
yea, he said he has some ready for the nbodies, so hopfully it will be on my car too.
Click the banner to enter the best Quad4 & Twin Cam site on the internet.
That's nice.
Love them long tubers.
Big huge collector too.
-M
Remember....syringes go in the RED waste basket.
Quote:
Never measured one but i think* 1 5/8" OD Tubes.
I hope they are that size. If they are I will order one.
That Race-Shop header looks nice, too bad it won't fit the Cav.
Jason
99 Z24
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
looks good. how much is it.?
i wouldnt give up my isuzuperformance header for it though.
hey scott trent, let us know when your done!
i wanted that header in my can too, but i was told it wouldn't fit...
if you manage to get it fitted, let me know how!
thanx
im doing my best man...im waiting on my ross pistons at the moment so i can put my bottom end together
as soon as they arive , the engine will go in and we will find out JUST WHAT IT TAKES to get that header to fit in a Jbody...that header yielded almost 20whp gain on a dyno I MUST HAVE IT
FACT : Statistics show that you are more likely to to be hit by lightning than to die street racing.
FACT : It is our American RIGHT to own a GUN but not to drive a car.
"Those who would sacrifice freedom for saftey deserves neither Freedom nor safety!" - Benjamin Franklin
"The real destroyer of liberties is he who spreads among them bounties, donations and benefits." -- Plutarch
i want it sooooooo bad too!!!!!!!!!
there is gotta be a way for this to fit...
well from what i can tell im Probably gonna have to cut out some of the subframe in that area to make room for it...which if your ok with that then there shouldnt be a problem...but lets make sure i get it in first
FACT : Statistics show that you are more likely to to be hit by lightning than to die street racing.
FACT : It is our American RIGHT to own a GUN but not to drive a car.
"Those who would sacrifice freedom for saftey deserves neither Freedom nor safety!" - Benjamin Franklin
"The real destroyer of liberties is he who spreads among them bounties, donations and benefits." -- Plutarch
good! please, be sure to take picture
thanx
yea..ill take pics..ill also let you know how much weight ive lost be hacking up my subframe LOL
FACT : Statistics show that you are more likely to to be hit by lightning than to die street racing.
FACT : It is our American RIGHT to own a GUN but not to drive a car.
"Those who would sacrifice freedom for saftey deserves neither Freedom nor safety!" - Benjamin Franklin
"The real destroyer of liberties is he who spreads among them bounties, donations and benefits." -- Plutarch