i am installing the upper mount insert later today. do i need to put a block under the engine for support? I have the Team forward motion install guide. Anything else i need?
don't forget the dish soap!
I was a retard, and now I'm permanently banned.
lol I used some dish soap and a 2x4 and shut hit it with the 2x4 and it slid right in
its not hard after you know how to do it...
use the dish soap.. after i got the cover off and the insert sitting in there i used a long extention and a small hammer to tap it into place... worked very good.
Check Out my Car Domain Page
dish soap and a hammer worked for me. Just get it set in, then use the back of the hammer as a level and push it down. Went in like a charm.
2006 Black Cobalt SS Supercharged G85
13.91@102.77
dish soap and brute strength worked for me
thanks guys, i just put it in
a few vibes, but no rattles, so i am pleased.
I put mine in using some of my shops spray white lithium grease and it just slipped right in there very nicely. no realy pushing or working involved.
Nate wrote:thanks guys, i just put it in
a few vibes, but no rattles, so i am pleased.
Wait till you get the bottom one in.
My rattles at idle but thats it.
<a href="http://www.azjbo.com">
<img src="http://www.jokerzrealm.com/track0.jpg" width=290 height=193></a>
Upper was fairly easy for me, just had trouble lining up the bolt holes....there was barely any vibration. The next day in installed the lower mount, went smooth and theres where i got my vibration. Basically only at low rpms.
Top and bottom was easy. I helped install a lower mount on my friend car. it almost seem like the stock mount was longer than the new one. Man we had to push the engine to get the lower mount on.
2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time
My top mount just slid in pushing it hard with my hands didnt even need dish soap.
<br><img src="http://memimage.cardomain.net/member_images/8/web/728000-728999/728095_1.jpg">
Yes officer I knew the speed limit was 50
