Ok, so I have the 2.2 in my sunfire, I bought the A/C serpentine belt for it yesterday put it on and it was slightly blowing very light cool air not cool enough to put the windows up I checked the pressure level of the refrigerant and the gauge showed full but still barely cold so I tried draining the refrigerant and put new refrigerant in until the gauge showed full, when I turn the A/C on you can tell its on because the clutch is locked in on the compressor and the idle changes slightly. I'm not a pro on a/c systems, I will note that compressor squeaks a little so I'm guessing that the bearings are getting shot on the compressor and seen that NAPA sells just the bearings for the compressor but I don't know exactly where to start looking as to what I should try to start replacing so wanted to see if anyone here had any suggestions on where to start pin pointing the problem. Thank y'all!


1996 Explorer XLT 4X4 Lifted on 33's
2000 Sunfire 2.2L Auto stock'ish