NO BLOW ON ANY SETTING. - Maintenance and Repair Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
NO BLOW ON ANY SETTING.
Sunday, April 06, 2008 6:04 PM
I have blower issues also. 1998 Pontiac Grand Prix SE. No blow on any speed. When I first got the car only the hi (#5 speed) was out. Went to turn it on yesterday and nothing, have lights and A/C light lights up when I hit the button so I am guessing resistors. Checked fuses and see that the HI HVAC was gone. put one an and it worked but it didnt go off when I tuned the knob or when i turned off the car! I went to Autozone tonight and picked up the resistor pack. now I need to know where mine is! do I also need to pull the blower? it looks as if it is in the very back and I can see it. if that is the case i also am having problems with the windshield leaking around that area into the passenger floor only when it rains or when I go to the car wash. Can i put regular silicone caulk down the bottom edge of the windshield? Some outdoor stuff? Thanks for any help! ANY DIAGRAMS WOULD BE HELPFUL. I am a woman that is determined to do this!! LOL upinstyle@sbcglobal.net


I have blower issues also. 1998 Poniac Grand Prix SE. No blow on any speed. When I first got the car only the hi (#5 speed) was out. Went to turn it on yesterday and nothing, have lights and A/C light lights up when I hit the button so I am guessing resistors. Checked fuses and see that the HI HVAC was gone. put one an and it worked but it didnt go off when I tuned the knob or when i turned off the car! I went to Autozone tonight and picked up the resistor pack. now I need to know where mine is! do I also need to pull the blower? it looks as if it is in the very back and I can see it. if that is the case i also am having problems with the windshield leaking around that area into the passenger floor only when it rains or when I go to the car wash. Can i put regular silicone caulk down the bottom edge of the windshield? Some outdoor stuff? Thanks for any help!

Re: NO BLOW ON ANY SETTING.
Sunday, April 06, 2008 8:56 PM
take a volt meter and turn pull the plug off your blower and see if you have voltage with the blower switch on, that would tell you if it is the motor, sounds like it to me.


------------------------------------------------------------





Re: NO BLOW ON ANY SETTING.
Monday, April 07, 2008 5:27 PM
WELL WE GOT IT!! IT WAS THE BLOWER RESISTOR! IT WAS TRASHED! EVEN WORKS ON HI #5 NOW!! WHAT A JOB. THE WATER IN THE FLOOR WAS THE WEATHER STRIPING THAT GOES UNDER THE TRIM PIECE THAT IS ALONG THE BOTTOM OF THE WINDSHIELD. IT WAS OFF SO WE CAULKED IT AND PUT IT BACK ON THEN CAULKED IT AGAIN. GOING TO RAIN TOMORROW SO WE WILL SEE!


CHRISTY NEUHAUSEL
Re: NO BLOW ON ANY SETTING.
Wednesday, April 09, 2008 5:49 PM
NO WATER! FIXED IT!!


CHRISTY NEUHAUSEL
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search