Anyone know how hard it is to replace the intake ad exhaust cam gaskets?,I have an oil leak in the back lower.
Gasket set is about $25.
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
Nevermind,read through the instr. in my Chiltons
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
ya might as well try and find some secret cams and throw those in at the same time
yeah I'd like to but I just started a new job so money is beyond tight.
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
Its really not as bad of a job as it looks.
Yeah,I plan on havin a friend help me this weekend,the way the Chiltons explains it it seems the intake would be harder,more stuff to take off,the oil leak isn't as bad now since we fixed the O -ring on the oil dipstick tube.
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
That little o-ring can suck my left nut. My 02 eats them on a regular basis.
They are both about the same to do as far as complexity. Both were leaking on my 98 so I took care of that this past weekend, did the HG as well while I was in there. This would also be a good time to check and see if your water pump needs replaced.
Yeah W.p.,timing chain and tensioner were replaced at about 106k,I'm at 128k now.This year will be all about maintanance.Thanks man.Jbom are some good guys,sorry for neg.feelings previously.
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
Its fine.
Any further questions just ask.
