Well, I had a problem with my lowbeams being out. I had a guy fix it (corrorded wire). So all my lights worked fine. I then installed some custom projectors from IZN TRBL. The driver side one worked, but the passeneger side one did not. I switched the lights and the passenegr side one worked on the driver side, but the driver side one did not work on the passenger side. So I plusgsged them both back in and a little while later neither of the lights work. But now I notice whe I turn the car on the light that shows that the highbeams are on is always on. If I pull the switch back like you would to turn them off it stays on. My projectors are only low beams. So anyone know what could be the problem?


Wide Body Progress

One of the high beams wires is touching a ground... so the car thinks the high beams are on, when they're really not. You need to double check your wiring connections.

think im having somewhat of the same issue, i have a hi/low hid kit in, and i cant switch between highs and lows and my high beam light is stuck on, could it possibly be due to teh fact that the car is a negative polarity system and the hid's are presumably positive polarity? Thus grounding both beams together and screwing up the cars system of switching

having the same problem as well..... could be it be due to the passenger side plug having nothing plugged into it?

well my car does the same. i have the stock lighting, with silverstar bulbs. i never had a problem untill i hooked up a set of driving light. i used a realy so they only activate with high beam. there is no switch and they co off with the lights. but the hb indicator is always on, somedays its off for a little. odd but no big deal unless u r dring towards me haha

Fireboy153
Brady Fire Co. - Station 150
Long Live The Sunflower! (yea its not so "cool")

i figure i'm just going to put some tape over it... i heard its bad to remove the actual bulb that lights the highbeam indicator... dont know why though... lol