Damn emissions.....
Anyhow I'm getting a P0134 on a 97 2.2 that has a newer engine. I already replaced the O2 sensor and cleared the code but it came back. I checked continuity on the wire I spliced and it was good, but I'm wondering if the wire is bad on the rest of the stock harness. Does anyone know where the O2 wire connects to the ECM? If needed I'll cut the stock wire aout and run a new wire. I need this done ASAP cause my clock (tags) run out on the 30th.
09 HHR LS, Wife's Car
05 Cavalier, Clarion DXZ375MP, Autotek MM8000.5 & 13Kv.2, wife's old car, updates coming soon
Which O2 sensor did you replace?
The first one. I fixed the problem. The wire running from the connector to the computer was bad. I just hard wired the O2 Sensor to the pin for the ECU. The cars pulls harder on the high end now, nice for freeway driving.
09 HHR LS, Wife's Car
05 Cavalier, Clarion DXZ375MP, Autotek MM8000.5 & 13Kv.2, wife's old car, updates coming soon
