question - Maintenance and Repair Forum

This thread is locked.
For more information about why this thread might have been locked, please read the rules.
question
Sunday, February 26, 2006 12:42 PM
well I have a few question , okay first off let me give you some info. I lose car 99 cavalier due to a fire were I was storing it at, now I have to rebuild the whole car again. My aunt have gave me her 96 cavalier, because she can not drive anymore. all the wrench time I did ( for the most part) myself. now my question is as follows

okay the cavalier is had gave me , is okay but I loved my 2200 motor over the 2.2 that is in there now.

1. I would like to change out the motor I was told by some of dealerships here that all I would need is the computer , wire for that motor ( and maybe some odds and ends stuff) that it was easy to change them out . so I wanted to see anyone here has done it. and what other problems did you have to over come.

2. will the 4 speed auto tran. fit the 95-97 2.2l motor??

me and my friend have done motor changes in car before and we are up for this

you and leave me a message here or email me at j_kozdron@verizon.net thanks for your help and time I will keep everyone up to date

Re: question
Monday, February 27, 2006 11:21 AM
2.2 = 2200 so why bother changing???? I f it were a 2.4 ....
Re: question
Saturday, March 04, 2006 10:32 PM
the 2200 is a 2.2l, but it's a slightly redesigned version of the 95-97 2.2l OHV. not quite the same thing, but not much better.

personally, i'd swap in a 2.4l engine (and tranny).




Re: question
Saturday, March 04, 2006 11:04 PM
oh, and since you have this thread going: http://www.j-body.org/forums/read.php?f=2&i=346052&t=346052

there's no need to have this one, so im just going to lock it.




This thread is locked.
For more information about why this thread might have been locked, please read the rules.

 

Start New Topic Advanced Search