Well people seem to still have a lot of problems with installing the ShiftPlus.... why i don't know so i went outside and i took pictures, the directions are below and pictures, u don't really even need the install directions if u look at the pictures, also if u can 't install it after this post then u really need to take your car to a professional,also the connectors used below did not come with the shift kit, these are called tap splices, which i got from home depot. so u now have everything lets hope its all u need.
TO INSTALL SHIFT KIT #70380 AT TRANNY... 2 MINUTE INSTALL: this install was done on a 98 2.2l 4 speed auto, this connector is found in the front of the transmission to the left of the battery, and to the right of the header, it is gray and circular, it is about 6 inches down from the red tranny vent plug, that's says trans, it is 2 inches in diameter, the wires u are connecting is the black wire to the lt blue with white stripe, now the other red wire you want to install to is the red wire with black stripe this wire is directly underneath the light blue one, not the one to the right of it, which is another red with black stripe wire, which has a dark blue wire underneath, look at the connector with the white arrow at 180 degrees, any problems let me know, i get no engine lights, and my ets off light doesn't come on like some people have had problems with stage II.
