She's go with very little show. "I'll drive it when I feel like it car." Rain, snow, and hail it has seen it all.

Last N/A Dyno numbers are as of 04-15-06: 160 hp & 152 ft/lbs all at the wheels.

Last update on motor...http://www.j-body.org/forums/read.php?f=2&i=441211&t=441080#441211

My hell tread on my previous not starting issues...now solved. http://www.j-body.org/forums/read.php?f=11&i=145548&t=145548&p=1

Should be the first or one of the first cavaliers to be running a LG0 with a 4T40E transmission.

• Current Engine

• Modified Matrix Ram Air Intake & Ebay Air Intake Hybrid
• "Clydes" LG0/LD9 Hybrid Titanium Spring Retainers
• 2.3L LG0 Valve Springs
• Design 3 Lightweight 2.3L LG0 Lifters
• LD2 2.3L 88 Intake & Exhaust Cams-200 degrees @ .050" with .375" lift-Both Cams
• LD2 2.3L 87-88 "Smooth Cam Towers with Steel Liner Inserts for LG0 Lifters"
• McMoney Cam Tower-End Covers Intake & Exhaust
• 56mm LG0/LD9 Hybrid Throttle Body
• 95 J-body Lower Engine Mount Bracket
• RKSport Upper Engine Mount Insert
• RKPosrt Lower Engine Mount
• Ennotech Designs - Stainless timing cover hardware kit
• Ennotech Designs - Urethane filled Transmission Mount
• Ennotech Designs - ARP Upper Mount Hardware kit
• Accel Adjustable Fuel Pressure Reg. ACC-74565 or Accel Adjustable Fuel Pressure Reg. ACC-74566 - Can not recall which is correct
• Adjustable Fuel Pressure Reg. Aeromotive 13107 or Aeromotive 13106 - Can not recall which is correct
• Auto Meter p/n 2173 Fuel Pressure Gauge
• NGK V-Power Spark Plugs p/n TR55
• Pacesetter Un-coated Header
• Catco 2.25" High-Flow Cat/Downpipe
• Pacesetter 2.25" Catback
• AeroSpeed 2.25"-4" Muffler
• CarCustoms/RKSport Upper & Lower Motor Mounts
• Removed A/C Compressor - Condenser - Tubing & Evaporator
• A/C By-pass pulley GM p/n 24574519
• 2000+ Starter
• Hyper Grounded Engine with 4 gauge Wire
• "Big 3 Upgrade to 4 Gauge Wire"
• My Prototype "Set 1" Custom Designed Lightweight Crank and Alternator Pulleys
• 2000+ Plastic Tensioner
• HPtuner's PRO
• Racetronix's F-Body LS1 Fuel Pump
• Racetronix's Upgrade Wiring Harness

• Current and Future Transmission 4T40-E

• 99/02' 4T40-E Eco trans internals in 99' LD9 4T40-E Case
• "Red" Yank 3000 RPM Stall Converter
• B&M Pro Racket Shifter - Under Development
• B&M Shiftplus Removed for HPTuners Tune
• TCI Auto P/N 823200 - TCI Performance Transmission Cooler
• Team Grean LSD
• Raybestos Blue Plate Special Stage-1 Complete Module # RCPS-29 4T40E/4T45E Trans
• RPT Stage 1# R600100-Forward-1995-Up-8684445
• RPT Stage 1# R600110-Direct-1995-Up-8684415
• RPT Stage 1# R600120-Intermediate-1995-Up-8684322
• RPT Stage 1# R600130-Coast-1995-Up-8684282
• RPT Stage 1# R600140-Reverse-1995-Up-8684266

  New Motor..Awaiting Swap and More PARTS!

  Zero Mile LG0 Crate Motor...Yes you read that correct

• LG0 High Output IDI cover
• 92 Quad 4 Thermostat - 180 Degree
• 91 Quad 4 Metal Thermostat housing
• 95 J-body Alternator Plug-n-Play with 99 Harness
• LD9 Hybrid Throttle Body - LG0 56mm Throttle Body Plate
• 95 LD2 Throttle Cable Bracket
• 91 LG0 Intake Manifold
• Ron's Header - 1.75" Primaries to 3" collector
• 95 Lower Intake Cam Tower
• LG0 Upper Intake Cam Tower
• LG0 Intake and Exhaust Cams
• Quad 4 Lifters - Light Version - Design 2
• Intake Cam +2 Degrees - Exhaust Cam -2 Degrees
• LG0 Dip Stick Tube - dip stick
• 95 LD2 - Timing Chain Cover
• Quad 4 Dual row timing chain - tensioner - guides - gears
• Aeromotive p/n 13107 or 13106 - GM LT-1 Fuel Pressure Regulator one is right on is left
• LD9 Fuel Rail with Auto Meter 60PSI Fuel Pressure Gauge - p/n 2173
• M45 LD9 310cc Injectors - GM P/N 17113399
• 6800-7250RPM Shift Points - Depending on Gear & 7500RPM Rev limiter
• Tuned with HPTuners Pro
• One range hotter NGK plugs -Gapped at 0.039" LN2 Ignition Conversion
• MSD Cam Sync Genorator - P/N 8914 - To replace missing Cam Sensor and trigger pad
• MSD Coils - P/N 8224 x2
• MSD Coil Bases - P/N 8870 x2 MSD 9mm custom Length Spark Plug wires
• CarCustoms/RKSport Upper & Lower Motor Mounts
• Removed A/C Compressor - Condenser - Tubing & Evaporator
• 2000+ Small LD9 Starter
• Hyper Grounded Engine with 4 gauge Wire
• "Big 3 Upgrade to 4 Gauge Wire"
• Custom "Crank Trigger" Crank Pulley - LD9 Diameter
• Custom Over Driven Alternator Pulley 1.818"
• 3" Stainless Steel Magna-flow -Highflow cat
• 3" Stainless Steel Piping
• 3" Stainless Steel Hush muffler x 2
• Ennotech Designs -8an Catch Can setup with drain back to block
• Tons of -an fitting and Summit twist-lok fitting and hoses
• Add more when I remember more.

• Stock 95-99 Z24 Rims with 225-50-R16 Yokohama AVS ES100 Tires or...
• Stock 95-99 Z24 Rims with 205-55-R16 All Season Tires
• RActive Front Strut Tower Bar Convertable GM Strut tower Brace - Two bolt firewall mount
• Vibriant Rear Strut Tower Bar
• Eibach 26mm Front Sway Bar #3860.310
• Energy Suspension Performance Sway Bar Complete End Link Set (Front) Part #9.8120R
• RKSport 22mm Rear Sway Bar
• Powerslot Cross Drilled & Slotted Rotors
• Hawk HPS Brake Pads
• KYB - AGX Adjustable Struts
• Eibach - Pro Kit Lowering Springs
• SGM Control Arms & Polyurethane Bushings Aluminum Grand AM Control Arms
• Level Zero Motorsports - Polyurethane Trailing Arm Bushings
• Teh Jeffie Delrin - Trailing Arm Bushings
• 3/8" Rear Hub Spacers Made by Teh Jeffie
• Teh Jeffie - 3/8" Rear Saturn Disk Swap Adapters
• Looped Power Steering Rack
• Russel - Braided Stainless Front and Rear Brake Lines
• Custom "DSMskyline" Rear Stainless Brake Lines from Axle to Rear Disks
• McMoney - Front Adjustable Chamber Plates - 96-98 lower strut mount plates
• Ennotech Designs - ARP Front Strut Mount Hardware kit
• Arraut Motorsports / Ennotech Designs - Solid Rear Mounts w/ Polyurethane Bushings
• To be acquired...BC Coil-Overs kit
• To be acquired...16x8" rims with 25mm offset
• To be acquired...245/45/16s in Bridgestone Potenza RE-11 to be exact...http://www.diamondracingwheels.com/

• 95' Graphite Full Dash
• 96' Graphite Headliner - Custom dome lighting cutout
• 96' Graphite Sun visors
• Graphite / Black Push Pins
• Map Light Buttons Delete
• 95-96' GM p/n 22643022 Under Dash cover Driver Side
• 95-96' GM p/n 22640120 Under Dash cover Passenger Side
• OBD2 Extension Cable: J1962M Right Angle to J1962F 6ft
• Chevy Racing Mats or Original Factory Mats
• 99' Blackcat Customs White Face & Red Glow Gauges "First Prototpye Set"
• Blackcat Customs HVAC Overlay White Face & Red Glow "First Prototpye Set"
• Blackcat Customs Dimmer & Foglight Overlay White Face & Red Glow "First Prototpye Set"
• AutoMeter Dual Gauge Pod and Single Gauge Pod
• Cyberdyne Oil Pressure Gauge
• Cyberdyne Transmission Temperature Gauge
• Innovative Motorsports MTX-L "Digital Wideband" Gauge Kit
• Momo Auto Shift Knob
• 1.25" Shortened shifter shaft
• Removed Vent Sliders
• Removed Backseat and Seatbelts (Added Black Carpet) Soon to add black ABS full seat Delete

• Ennotech Designs - ARP Fender - Hood & Latch hardware kit
• Ennotech Designs - 10" Teal Tow Straps - Front & Rear
• Shaved Chevy and Cavalier Emblems
• Clear Corners and Bumper Lights
• APC Euro Tails - To be replaces with 95 Tails with working separate turn signals - like Toyota Cavalier tails
• Chevy Bow tie Valve Caps
• Short Coil Antenna
• Team Innovation Decal
• Third Brake Light Overlay (Z24)
• Grille Tech Mesh Grill Inserts
• Painted Drums & Calipers
• Redline Gas Hood Struts
• "Titus" Carbon Fiber Center Caps
• Carbon Fiber Gas Door
• Original GM Cavalier Mud Flaps
• Custom License Plates (MD LD9)

• Pioneer 4x6s
• Pioneer 6x9s
• Sony Explode CDX-GT260MP Head Unit
• That enough audio for now....

• LG0 running on a custom 99 Tune (Scraped this idea and sold LG0)Bought another LG0...this is ON!!!
• J-Body Stickers
• Random things removed for weight Reduction

• Finish Engine Build/Rebuild and Trans Rebuild
• Repaint the whole CAR
• Maybe some Drag Slicks on CORE RACING SUPER-LITE 14's and 16's
• For Ref. 2.3 A/C By-pass Pulley p/n 22533199
• Powder Coating Everything PMB 1250 TAHITIAN TEAL or Torque-N-Teal...better yet UPB 1736 HAWAIIAN TEAL...or H.D. Teal UPB 1848
• Melling LG0 MC1235 & MC1236 Cams
• Comp Cams 53-000-5I HG2 Intake Cam
• Comp Cams 53-000-5E HG2 Exhaust Cam
• Melling LGO JB-2236 Lifters
• Crower Neon/Mitsubishi Valve Springs Part Number: 68190-16
• NR>>G Steering Wheel - RST-012S-RS
• W41 IDI Cover P/N - 10474365
• ARP 254-2901 - ARP Pro Series Flexplate Bolt Kits
• Either Jegster 4 Point Cage P/N 949401K or Jegster 8 Point Cage P/N 949403K
• Hoosier Drag tires P/N H00-17320
• Toyota Trunk Liner GM - P/N 22657896 & Retainers GM - P/N 11518017
• SUNBRELLA AQUAMARINE Interior
• SEM Texture Coating - P/N 3985
• Powder Coat Exhaust and Header - Tungsten High Temp Cerakote
• 245/45/16s on a 8" Rim with 10mm offset
• GM Premium Front Mats - P/N 12495315
• GM Premium Rear Mats - P/N 12495253
• ACDelco/GM 95 LN2 Radiator Surge Tank - P/N 22641036
• Shorter ACDelco Ebrake Cables - P/N: 22651234 I'm sure I forgot to list a bunch of stuff!