I know this will prob get locked but I have 100 of them if anyone needs to disable there airbag light due to replacing the steering wheel with a after market one let me know.. I will only charge a small fee to cover postage and envelopes to send them in,


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

fee please... also how do you install them

its not hard

I will be doing a full install write up this weekend hopefully on the momo hub and steering wheel. I will for sure atleast get pics to help everyone out if not get the whole step by step written up.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

Would this by chance allow the passenger side airbag to continue to function? I don't really care if I die in a wreck, but I don't want to risk my passengers' lives if I don't have to.

I believe that someone posted something about the driver's airbag being disabled for some time and the passenger one going off (might have been the other way around) while the car was parked in a shop... I'll have to look later for it.

So I'm guessing it WAS the 2.2ohm after all?

If the SDM thinks the driver's airbag is there (with the resistor installed), then yes the other airbag(s) will still go off in case of an accident.... assuming that the airbags are deployed... (sometimes you hit, and they don't go off... but that won't be changed by the resistor).

sweet... can't wait for the writeup. I'm planning on getting a wheel pretty soon.

Quote:

So I'm guessing it WAS the 2.2ohm after all? yes it is also 1/4 watt

I will let you guys all know soon. I was going to install it this weekend and do a detailed wright up but a heilo went down and we have been flying all day and night doing search and rescue missions. So far only 1 of 3 are confirmed dead and found. SO bare with me I will get this done hopefully next weekend.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

Ok so today me and my buddy installed the resistor. Took some time and I think we fried a few. They would work fine then all of a sudden they would stop working. I will pm those who wanted some of them with some info on how much and what not.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

ya man, lemme know

How much for the resistor? I'm interested. I'll be putting my wheel back in when the weather here in Cleveland thaws out, and don't want to black tape the gauges.




Gotta keep on livin', L-I-V-I-N

id probalby be intrested as well. well once you figure out whats going wrong with them.


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography

I think my problem was bad connection or that I was moving them to much and broke them. Either way its fixed now and I will sell them for like 2 bux for 6 of them. That will cover postage and give you some to play with.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

What ohm?

Got pics and instructions?




Gotta keep on livin', L-I-V-I-N

No pics but I will write something up and I don't know the ohm off the top of my head.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

Cavie Freak, what's new with the resistors. I just installed my new wheel, and already the light is getting on my nerves. How much are they, and do you have intructions for how to wire these up? Thanks




Gotta keep on livin', L-I-V-I-N

I grabbed a pair of 2.2 ohm 5 watt ones... maybe they'll be a bit sturdier than the 1/4 watt ones...?

Does anyone have pictures of how to install these. Where do they plug into and so on?




Gotta keep on livin', L-I-V-I-N

let me know also, you can even pm me if you like. thanks, I just bought a Sparco wheel and ordered my momo hub.

Sorry for the delay been having some family issues and working 13-16 hour shifts. For the guys that want some pm me I am going friday to the post office to set up a po box and will be able to pick up stuff to send them. Again very sorry for the delay and if I can I will post pics of where they need to be installed at. I ended up doing my different cause I snipped off a pics I shouldn't have.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

Post some pics. I'm intrigued. Thanks.




Gotta keep on livin', L-I-V-I-N

lenko how did that bigger resistor work for ya?