I've got all the receipts with the part numbers around my garage somewhere, but I'm not sure where at the moment. I've been puting in 70 hour weeks at work lately, so I haven't had much time/energy. I'll post up some part numbers when I get around to it, but I will tell you that most of the parts come from a 95 Grand Am with a 3100. If you have any specific questions shoot me an email. I haven't been on here much lately.

any updates on this swap

Opening Soon Kustom J's

hey guys
with the swap what 3400 computer you used on your swap because when I call the junk yard they told me there is 3 computers that would work so I need to know what computer to get and here is the ID numbers for the 3400 16236757,9356741,9361733 so i need to know the right one so when I call the junk yard again I can tell them the ID number


Opening Soon Kustom J's

I'm using a 95 F-body computer, because my car is OBD I, and the computer I got is from a 3.4L Camaro with a 5-speed.

You can probably use any of those three, as long as they are ODB II.

Are you doing this with a manual trans or automatic trans? If you are going with a manual, you will have to send the computer out to be reflashed for the manual tranny.

Ok, I got a question now is it better to get a stock 3400 engine wire harness or make your own engine wire harness either way you look at is that you would have to still cut up the 3400 engine wire harness to make it work in the 3rd gen so I was thinking about making my own but I dont know what all sensors I would need for it.


Opening Soon Kustom J's

lol, did this car ever get finished?





Whats a Cavalier?

I've finally got the engine, and work is beginning. I believe I asked this question a couple of months back, but , as you can see....the thread is damn long now and for some reason the search isn't showing it.

Anyway. I know I need the ECU from the 3400. Do I also need to get a PCM and BCM from it? I think I can use the BCM from the cavy, right? I have found a PCM upgrade and wonder how it would work.

Digital Horsepower PCM
What do you guys think?

so robert did you get your cavy tuned yet

wow where did this thread come from?




01 cav w/01 3400 gam gt 4t45e

From way back in the forum

Can a couple of the images be fixed or reuploaded (mainly the lower mount) or a link posted to a site that has it? Alot of the stuff from 2k4 is now dead links....


edit: n/m


http://www.j-body.org/forums/read.php?f=30&i=33041&t=33041





Edited 1 time(s). Last edited Monday, September 11, 2006 7:49 PM

Kardain wrote:Can a couple of the images be fixed or reuploaded (mainly the lower mount) or a link posted to a site that has it? Alot of the stuff from 2k4 is now dead links....

Mr. Goodwrench put this site up a long time ago when he was only knee deep into this swap
There are a lot of good pictures that should help you understand the swap a little more.
Black Ops 3rd Gen Page

Hmmm...... I think i have the lower mount diagram here somewhere. Let me put it on photobucket.

Robert made this diagram. I shall re-post it, for all who need a lower engine mount.

[img[http://s66.photobucket.com/albums/h280/PulledOverAgain/th_dogbonemountmeasurements.jpg

Works much better when you use the preview button first I guess.

Awesome. Thanks guys