Anyone have these?

i was looking @ baers site but they dont have very much info on them.

anyone?

you mean selling them or people in general?

Gravana Sells The Rears if thats what your looking for

We might have more @ www.TurboTechRacing.com

We can help you out... FYI Baer makes these to order and takes 1-2 months to ship sometimes. We have found SSBC ships in 1-3 weeks, a lot faster...


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!

far as i know baer never made the 12" fronts for the J's , and what i was told never will

for 12's go the n-body route and use the f-body calipers , and w-body rotors

i already have te baer 13" kit......i just wanna smaller version to run stock wheels

well just got off the phone w/ baer,

they did have a "sport" setup that was a 12" kit, they sold less than 10 cause everyone wanted the "track" setup.
It was discontinued last year, so no pieces available.

im suppose to get a call tomorrow for dimension on the bracket and what rotors were used,.

Justin, My Baer rep told me they never made the kit. There was no interest so nothing was done. Alan was looking at converting his 13" to a 12" front and nothing exists and never has.

The Wilwood's are 12.1" and Karo has proven they will fit on a 15", it's just a bitch finding a wheel under 17" that will clear them.

ive got 2 enkei's that came from joes old cav , i forget what the model name is but they clear the wilwoods , the link below is the only 1 i could find

http://orlando.craigslist.org/pts/414715323.html

Turbo Tech Racing wrote:We might have more @ www.TurboTechRacing.com

We can help you out... FYI Baer makes these to order and takes 1-2 months to ship sometimes. We have found SSBC ships in 1-3 weeks, a lot faster...

so baer does make the completefront and rear setupbut they are made when ordered?

i was wondering About that because they arelisted on andysautosport.com but baer's website turns up nothing.

'05 sunfire. rksport intake, 2.25" custom dual catback, b&m short throw pacesetter header and high flow cat.

It is a special order part, a few of us vendors can get from them


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!

these clear the wilwoods, i run them with my drag radials with plenty of room



R.I.P. Brian Klocke, you will never be forgotten

Brandon, I was looking at those a while ago on Ebay and was wondering if those would fit over my 13" brakes lol... How much room do you have left with your wilwoods over ur calipers?











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

the baer setup on my grand am is a 12" kit. I'd assume it's a similar setup



'00 Grand Am 2.4L LD9
http://www.cardomain.com/ride/816505

Boosted2point4 wrote:these clear the wilwoods, i run them with my drag radials with plenty of room

What size do you have and do you know exactly how much just the rim weighs?



Edited 1 time(s). Last edited Thursday, December 27, 2007 11:04 AM


FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

baer template.....

wade they weigh 17lbs





R.I.P. Brian Klocke, you will never be forgotten

Brandon, is that a templet for the 12" or 13" rotor set up, also does it hit the back of spokes on those rims?


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

Its the 13" template, I sent him the link











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

ill be finding out for sure if it fits or not tomorrow, guy i know is driving out his cav. which some of the older people might remember its jack browns old car.... so ill be posting pics tomorrow....



R.I.P. Brian Klocke, you will never be forgotten

i wanna see, its tomorrow already

sorry for the let down everyone, he showed up today and then found out he doesnt know where his socket is for his mccard lug nuts... so hopefully he will find it and i can run one of these down and see if it fits, all i have to say is holly big brakes batman, i think it pushing it, the bears make the wilwoods look small...



R.I.P. Brian Klocke, you will never be forgotten

Lol, yea man, they are huuuge.. When you look at them behind my 18's, the brakes actually look much bigger than 13's lol. Can't wait for the pics.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

I know its cold as crap outside Brandon, but have you gotten a chance to see about the fitment?











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Bump for updates










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Bringing this one back. Was wondering if those 16s did fit with the 13" rotors.

PICS PICS! I want pics. I used to sponsor that car you know! lol

Just wondered how it's holding up.






Stuff For Sale - Classified Ads - Click Here!