Hello. Just unloading lots of things I will not be using or do not need. You pay shipping. Willing to drive if close. Ask any questions as need be. Paypal or cash only. Thread will be updated with things I find and if stuff sells.

1. Darton sleeves - used ~400 miles - Sleeves are in great condition. Were put in block then removed. Very little miles. Not using to due to change of build idea. $400


2. Greddy Turbo Timer - Like new - Excellent condition. Barely used. $100


7. OEM camber/caster plates for Koni style strusts - ~200 miles, good condition. Stopped using due to coilover purchase. - $180


Non-picture section. Will provide with need basis.

9. Cryo treated Eco block - 20k on it. No crank. Good start point for a build. - $125
11. 4T40E Auto transmission - 41k miles. Out of a Cobalt. - $300
12. Piles of stock parts - random stock Ecotec parts, let me know what you're looking for.
13. NRG carbon hood pins - New in box - $50

i can personally vouche for these mentioned items that are for sale above.
great guy, aswell as seller.


jeffie hub spacer- ill have to give you monies for them still


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

What if I want the hub spacers matt?

Then I'll just have to take the saturn adapter

I've been wondering about the koni sport kit, are they the same struts as the $160 each koni yellows?
Whats the drop on those anyways, I might pick em up ehen I grab meh stuff.

I can swing by Wednesday.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

lol, tough tittays then.



Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

ill give you the catch can



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

And I'll take the neon setup if it comes with new pads and rotors hah



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

10. HKS SSQV3 on 2.5" pipe - 14k miles - It works. Moved up to a TiAl Q - $120
SOLD

Swinging by tonight. Text me when a good time is.

I do have a greddy ebc + a car load of j-body partss for partials if yer interested. Its all in the jeep, look at it when i come by.



I roll on steelies. Work-in-progress daily-sleeper potential.
http://www.j-body.org/classifieds/engine/60493/

im interested on the neon setup and the torque converter let me know
txt 956.250.7878

Kris you have been texted.

do you have an eco alternator for sale in the mix there? . if so how much do you want for it?

Where did the high stall come from, and what brand is it?

Very interested.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

how faded are the 00-02 toyota tail outers? Bulbs/sockets included?

I will get some pictures for you tomorrow Alias. From what I remember they were in good shape.

Interested in the torque converter if still available. Txt 989-413-1867.

Torque converter sold.

Thanks for the torque converter. Quick shipping, good seller.
Jason



USACi =>146.9db
14.88 @ 90.73MPH =>GM Charger, Motor Mounts, Catback exhaust

I want your Saturn spacers now much to ship to Bedford Nova Scotia canada. Postal cod b4a3r1. And what's your paypal. Thanks

Let me find them Peter and I'll get a quote ASAP.

cool gave you wrong postal code this is the one b4a3v9 thanks email is blackwidowcavalier@hotmail.com just email me

How much does that block weigh? whats left in it? what would shipping cost to S7L4P5 not using UPS or Fedex.

Did you find out any thing for me

Peter I've been busy but had a chance to look. I think I sold them a while ago. I must not have updated this. I do apologize. If I do for some reason end up finding them I will PM about it.

Todd if my memory serves me correct the weight is about 80lbs. It is literally a bare block. No crank. Does come with an oil filter cap.

Thanks Mike for the information and I may be interested in the block as I have the Eagle crankshaft with the timing ring and also the ported head from GM so that shouldn't be a problem...How much would it cost to ship the block to the Postal Code listed above. I do have paypal as well so that shouldn't be a problem either if it isn't too much.

Todd did some checks to see what shipping would cost. When I shipped my own block I used a large 3M heavy duty storage container. I'm not sure which service you'd like me to use to ship but when I checked estimates it's right around 105 to ship. Let me know if you have any ideas.

Yeah I will most likely get that then do you have any pictures of the block?

I can grab some here soonish. If you want me to ship it the same way I did my block I can purchase the container at your expense, pack it the same way, and send it to you.

That will depend on the pricing of them most I have checked around town are 50-150 here (the more expensive once was real nice lined with padding and everything and could have v8's all the way down to V4's (watch how many people correct that and I know its not that just lazy)). What is the price of yours?

I believe this is the one I used Todd.

http://www.homedepot.com/p/Rubbermaid-24-gal-ActionPacker-Storage-Box-FG117204-38/100578775?cm_sp=BazVoice-_-CAT-_-b40847ac-ce9e-4ff2-b689-3c5881aa1970-_-x

I filled the inside with paper and whatnot for padding, had it banded shut, shipped, and had zero issues.

Hey Mike sorry for the delay but I may have found an entire motor locally for 175 but its not cryo'd, so I may have to pass on the block as it is a cheaper deal. I may have some interest in the sleeves depending which turbo I get if they are still available.

Oh don't worry they'll be here. Not many people who need them. Let me know.

will the camber plates work on my 99 cavi?i have koni yellows!

Absolutely! That's what they're made for.

how much did it cost to have the block machined for sleeves?



Enjoy life while you can, because you only have one shot. So go BIG or go home.

If I remember correctly it was 1200. I'm not going to say that is the price set in stone but around there. That price is through Darton's main operation place. If you can find a local machine shop that is Darton certified you may get it cheaper.

Darton is down to $600 for installation now, and quoted me less than $600 for a new set of sleeves. Would you come off that $400 price tag?



Enjoy life while you can, because you only have one shot. So go BIG or go home.

Damn well looks like times have changed. I can come down a little, but not much.

pm me how much



Enjoy life while you can, because you only have one shot. So go BIG or go home.